Feature(may vary by option.)
●Safety & Versatility: Malta Dynamics Reusable Parapet Anchor Clamp securely anchors SRLs on flat roofs with parapet walls. Designed for walls with 2.36"-14.1" thickness, it measures 25.5" in length and 14.25" in height. 9" minimum wall height
●Field Tested & Approved: Meets OSHA and ANSI Z359.18-2017 Type A standards for safety and reliability
●No Tool Easy Installation: Non-penetrating design and dual tightening handles make tool-free installation quick and easy. Rubber protective pads prevent parapet wall damage
●Reusable & Durable: Made of strong, durable materials including alloy steel and zinc-plated steel, with a weight capacity range of 130-310lbs.
●Adjustable & Practical: Fits parapet walls 2.36"-14.1" thick and provides a practical solution where SRLs cant be used. Intuitive and easy to adjust
[3]
Description
Instructions for Installation of Parapet Anchor:
1. Remove the detent pin and adjust the arm back far enough to allow the clamp to fit over the width of the parapet wall.
2. Make sure the inside top surface of the anchor slot is completely seated on the parapet wall.
3. Move the adjustable arm toward the parapet wall and replace the locking pin through the appropriate position setting holes.
4. Twist to tighten each set screw until it contacts the parapet wall, use hands to tighten each screw until it is secure. Excessive torque can damage the wall or the parapet wall anchor.
*If the anchor is not installed properly, it will not hold the rated loads and serious injury, or death, could occur.
|
|
|
|
|---|---|---|
LIGHTWEIGHTThe Malta Dynamics Parapet Anchor is made from durable galvanized steel and features large rubber pads on the tightening screws for a secure non-penetrating anchor design. |
EASY INSTALLThe Parapet Anchor can be installed in as few as two minutes! There are no special tools or fasteners required for a successful install, and dual tightening handles create even force distribution. |
NO DAMAGEStaying safe should be your priority. Sometimes it’s hard to anchor safely without damaging the surface you’re working on, but this anchor leaves no lasting damage. |
Premium Benefits:
- Dual tightening handles for even force distribution
- Protective pads eliminate damage during install
- Flange width adjustable from 2.36”-14.1”
- Includes extendable arm
- Non-penetrating anchorage design
- No installation tools required
Parapet Anchor Features
· Lightweight, portable, and reusable
· Worker weight capacity range: 130-310 lbs.
· Minimum tensile breaking strength: 5,000 lbs.
· No fasteners needed
· Material: galvanized steel
· Pad material: rubber
Certifications
· ANSI Z357.18-2017 Type A
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| Roof Anchors | Malta Dynamics Parapet Anchor | Malta Dynamics Permanent Roof Anchor - Easy Installation with Included Hardware | Malta Dynamics Roof Anchor 18" Threaded Top, OSHA/ANSI Compliant | Malta Dynamics 4-Way Anchor Plate, OSHA/ANSI Compliant | Malta Dynamics Swivel Anchor Point (5K), OSHA/ANSI Compliant | |
|
|
||||||
| Customer Reviews | 6
| 6
| 51
| 4
| 5
| 18
|
| Price | $319.99 | $319.99 | $18.99 | $275.99 | $109.99 | — |
