Feature(may vary by option.)

●【Noted:This is RX Only】 【Splitter Function】Support 1 TX up to 4 RXs Max, 1TX to 1RX (200m), 1TX to 2RX(60m), 1TX to 3RX(30m), 1TX to 4RX(20m) . Buy the pair package from this ASIN: B09Y1173WD
●【Support Maximum 1TX to 4RXs】This wireless hdmi extender can support 1 TX to 4 RXs (Max), you can add more RXs according to the quantity you need. If more RXs are needed, you can buy more RX , which allows up to 1 TX and 4 RXs connections.With the increase of RX, the wireless transmission distance will be shortened.(line of sight distance,unobstructed), 1 TX to 1 RX transmission distance: 200m; 1 TX to 2 RX: 60m; 1 TX to 3 RX: 30m; 1 TX to 4 RX: 20m.
●【Stronger Wireless Transmission Signal】This Wireless HDMI extender that extends HD audio/video streaming distance to 660 ft (200 m). [Note: The distance will vary depending on the environment. Walls, bricks can shorten the signal coverage or cause significant signal loss.
●【Low Latency with Local Loop-out】 This extender transmits lossless signals and may have a transmission delay of 0.1-0.3 seconds, which depends on the signal quality it is great for movies, TV, Videos, and presentations, not be suitable for games；but the loop-out local display has no delay at all.
●【Infrared Remote Control, Plug and Play】 Wireless HDMI transmitter and receiver with IR support 20-60KHZ infrared emission, Implant infrared signals into wireless signals, and remotely control reachable devices (such as TVs, projectors, etc.) in the bedroom. Plug and play, The does not need to install drivers. Just connect this wireless transmitter to receive! Reduce the trouble and cost of installing cables and set-top boxes.

[Ultra HD Wireless HDMI Extender TX&RX]




[Ultra HD Wireless HDMI Extender RX]





Description

Wireless Hdmi extenderWireless Hdmi extender

Wireless HDMI Extender Receiver

  • 5.8G wireless transmission with dual antenna design improves the quality and reliability of wireless HDMI signals.
  • Easy installation, plug-and-play, no additional settings.Avoid the cost and time of installing complex and expensive wiring infrastructure.
  • Support IR pass-back with 20-60KHzfrequency,with local loop-out function.
  • 1080P high-definition picture quality, support 1080P@60Hz high-definition resolution, support 60 times per second picture update frequency, clear and natural playback, smooth and clear picture".

With the increase of RX, the wireless transmission distance will be shortened.(line of sight distance, unobstructed)

1 TX to 1 RX transmission distance: 200m; 1TX to 2 RX transmission distance: 60m;

1 TX to 3 RX transmission distance: 30m; 1 TX to 4 RX transmission distance: 20m;

Support Maximum 1TX to 4RXs

This wireless hdmi extender can support 1 TX to 4RXs (Max), you can add more RXs according to the quatity you need.

Noted: Users need to pair themselves as needed (as picture) to allow multiple expander RXs to be used. If more RXs are needed, you can search for the to purchase, which allows up to 1 TX and 4 RXs connections.

How to add more RXHow to add more RX

656Ft Line Of Sight Transmission656Ft Line Of Sight Transmission

Low Latency with Local Loop-outLow Latency with Local Loop-out

IR ControlIR Control

656Ft Line Of Sight Transmission

Wirelessly transmit HD signal (up to 200m under a barrier-free environment without interference)

Plug-and-play with Local Loop-out

Quick and easy setup as no complicated cables or wires are required and no software has to be installed. The HDMI local output on the transmitter acts as a distributor and provides an additional output for use by the local display.

IR Control

  • Equipped IR signal extension, you can control the signal source device at the receiver and it supports IR transmission
  • Simply point your remote at the IR emitter included with your device to control your source A/V device.
Audio SeparationAudio Separation

Audio Separation

The AMS interface on the TX is used to collect external audio, and the sound is transmitted through the TX to the RX for play the collected sound.

Installation Steps

  • First connect the HDMI cable, the signal source connect Sender (transmitter) IN input; local display device connect Sender(transmitter) OUT output.
  • Then connect the receiver to a remote display device (such as a television, a splicing screen and so on).
  • IR remote control function: pay attention to the infrared head of the sender should face and close to the signal source.

Wireless HDMI Extender ReceiverWireless HDMI Extender Receiver

Product information