Glad I received such a great machine, but how should I start using it?
1-Make sure the accessories are complete.
2-Check if the machine is in good condition.
3-Remove the rubber stopper of under water tank.
4-Clean the machine according to the section in the manual.
5-Use functions according to the instructions.
Im using this espresso machine for the first time, do you have any good advice on how to make a good espresso?
1-Variety of coffee: The darker the roast, the better.
2-Thickness of powder: If powder is too coarse, the extraction will very fast and no crema.
3-Amount of powder: Add until the MAX line.
4-Strength of tamping: Use greater strength to compact.
When I used the milk froth function, I found that the steam was very weak. Has anyone dealt with this problem?
The outlet of the steam pipe may be blocked:
Step1-Ensure the Steam knob is in START/STOP position.
Step2-Reset the FROTHING Button to READY state.
Step3-Insert a pin up the nozzle hole and remove.
Step4-Run Steam through the wand for around 20s.
Today, the espresso machine didnt come out the coffee suddenly. How to fix it?
We recommend that you follow the instructions to make a Perfect Espresso Coffee:
Choose fine powder, add sufficient amount to the MAX line, and tamp with greater force, so the coffee that comes out is good with rich crema.
I find it a little laborious to insert the portafilter, is this normal?
Yes, it takes force to install the portafilter. This is to prevent water or coffee from leaking through the portafilter. After using for a period of time, the portafilter installation will be smoother without too much force .