Glarks high quality heavy duty gun with molly bolt hollow wall anchor screws assortment kit
Specification:
-- Product type: Heavy duty gun with molly bolt hollow drive wall anchor
-- Gun Meterial: Metal and plastic
-- Molly Bolt Meterial: Zinc plated steel
-- Gun Size: 16.3cm x 12cm x 2.7cm/ 6.42" x4.7" x 1.06"
-- Molly Bolt Size: 4x32mm, 4x60mm, 5x52mm, 5x65mm, 6x52mm
Feature:
♢ Heavy duty metal gun with non-slip rubber grips and slip guard
♢ Zinc plated on the surface can keep them from rust and corrosion
♢ Heavy-duty hollow drive wall anchor expansion when installing, providing strong bearing capacity and safety
♢ Suitable for a wide range of thicknesses of hollow walls
Package:
4x32mm Molly Bolt (Fit 3 -12mm thick panel) x 4pcs
4x60mm Molly Bolt (Fit 28 -38mm thick panel) x 4pcs
5x52mm Molly Bolt (Fit 3 -14mm thick panel) x 4pcs
5x65mm Molly Bolt (Fit 14 - 27mm thick panel) x 4pcs
6x52mm Molly Bolt (Fit 3 - 16mm thick panel) x 2pcs
Heavy Duty Setting Tool x 1pc
Installation Steps:
1. Drill a hole in the wall first
2. Insert the hollow wall anchor into the hole
3. Hold the screw head with a tool and pull it outwards, and the anchor expanded
4. Place the object and install the screw in
Application:
Perfect for cavity anchor plasterboard fixing, widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches
Attention: Some friends who bought this product give feedback to me that the gun could not be used for the size of M6. I found this situation will occur when the hollow gun is not in the original state.
If you have any problems during use, please feel free to contact me and I will try my best to help you.