Feature(may vary by option.)
●【Motion Activated】 : Sensor function triggered by motion, you can use this small motion sensor switch to control lighting like Led strip lighting.
●【Light Sensor Adjustable】: This function allows you to use the motion sensor in different ambient condition, for example, you set the light sensor value to 20 lux, when the room ambient light value is above 20 lux, the light won’t turn on, but when room ambient light value is less than 20 lux, the sensor can turn light on when motion detected within sensing range.
●【Delay Time Adjustable- Please set this to its minimum value first then try to figure out your values for the Sensitivity and Light Sensor- this will save your time】: The delay time controls how long the light stays on once it gets triggered, during the delay time if motion detected, the delay time will reset and start a new delay time.
●【Sensitivity Adjustable】: The sensitivity controls how close you need to be to the sensor in order to activate it.
●【Wide Application】: You can use this sensor in different occasions like entryway lighting, cabinet lighting, gun safe lighting, pantry lighting, under the bed rails lighting.
[2 pieces]
[1 piece upgrade with dimmer]
Description
Description:
PIR(Passive infrared) Motion sensor is pyroelectric device can detect human movement by detecting Infrared ray emitted by human body. Widely used on the Motion-activated lighting, LED strips Security System, automatic sensory device and more...
Attention:
1. Dont exposed to direct sun light or lighting, big wind, near a heater or air condition.
2. Dont fix it at a place where there are obstructing material (e.g. Glass, dense clothes) which IR cannot get though.
3. Dont fix it in strong shock or vibration environment.
4. The PIR Sensor requires a warm-up time in order to function properly, about 10s to1min,depend on the delay time; during this time, the signal triggered by the module is not stable, after one minute, it will be ready.
|
|
|
|
|
|---|---|---|---|---|
| Sensky BS010l DC12v to 30v Mini Pir Motion Sensor Switch | Sensky BS010 Long Distance Time Adjustable Smal lMotion Sensor | Sensky BS010WL Motion Sensor Switch for DIY LED Lighting | Sensky BS010W DC12-30V PIR Motion Sensor | |
| Customer Reviews | 1,296
| 558
| 487
| 558
|
| Price | $10.99 | $10.99 | $10.99 | $10.99 |
| Model Number | BS010L | BS010 | BS010WL | BS010W |
| Delay Time | 5-25sec (2~280 Seconds adjustable) | 5-25sec (2~280 Seconds adjustable) | 5-25sec (2~280 Seconds adjustable) | 5-25sec (2~280 Seconds adjustable) |
| Detection Range | 4M-7M (10cm-7M adjustable) | 4M-7M (10cm-7M adjustable) | 4M-7M (10cm-7M adjustable) | 4M-7M (10cm-7M adjustable) |
| Light Sensor | 20lux (10~300Lux adjustable) | No Light Sensor | 20lux (10~300Lux adjustable) | No Light Sensor |
| Voltage | DC 12V-30V | DC 12V-30V | DC 12V-30V | DC 12V-30V |
| Load current | ≤ 3A | ≤ 3A | ≤ 3A | ≤ 3A |