Feature
●👍 Newest 32bit-AK4493S DAC chip ▶️ The DX1 uses the newest sub-flagship AK4493S chips of AKMs VELVET Sound technology. The DX1 decodes up to 32-bit/384kHz PCM in a stunning 120dB of dynamic range.
●👍 Powerful Output for IEMs and Full-size headphones ▶️ With high/low gain options and two outputs (6.35mm and 3.5mm), the DX1 is ready for IEMs, full-size headphones, and everything in between. Despite its small size, it can output up to 280mWx2 @32Ω and 51mWx2 @300Ω of power.
●👍 Plug and Play ▶️ DX1 has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play, dont need to install a driver. ( Except Windows ASIO applications)
●👍 Discrete LNRD ▶️ The Discrete LNRD circuit filters out the noise and interference of USB 5V power and provides stable and clean power supply of ultra-low noise reference level for DX1. With this technology, the noise of the DAC part is lower than 2.0uV, and the noise of the AMP part is lower than 1.0uV. Even high sensitive IEMs will not be bothered by noise.
●👍 Pure DAC Function▶️ DX1 has Line out with fixed volume, which can be used as a pure DAC with headphone amplifiers, power amplifiers and other devices.👉👉👉Note, please consider the following information before deciding to add to cart. 1. DX1 does not use nfca module 2. The volume of line out is fixed at the maximum and cannot be adjusted 3. The headphone amplifier output and the line output will come out simultaneously
[Silver]
[Black]
Description
DAC & Headphone amp
TOPPING DX1
WHERE IT ALL STARTED
Note, please consider the following information before deciding to order.
1. DX1 does not use nfca module.
2. The volume of line out is fixed at the maximum and cannot be adjusted.
3. The headphone amplifier output and the line output will come out simultaneously.
Headphone amp
DX1 has both 6. 35mm and 3.5mm headphone output to meet more needs.
Excellent enough for serving as a pure DAC
DX1 has Line out with fixed volume, which can be used as a pure DAC with headphone amplifiers, power amplifiers and other equipment.
2 gain settings
DX1 provides 2 gain settings, which greatly expands the range of headphone adaptation.
How to connect with your phone
1）Connect to Iphone：Insufficient power supply for iphone, need to use 2.0 Lightning OTG and USB 3.0 Female to Dual USB Male Y-Cable.
2）Connect to Android：The phone can be powered directly, using Type-c OTG cable or USB 2.0 Type-C to Type-B.
Dimensions
Measured: 10.0cm X 9.8cm X 3.2cm
Weight: 255g
Contents list
1. DX1
2. USB cable
3. User manual
4. Quality card
DAC&Headphone amp
 TOPPING DX1 |  FX-Audio DAC-X6 |  TOPPING G5 |  TOPPING DX3Pro+ |  TOPPING DX5 |  TOPPING DX7Pro+ | |
| Audio Device | DAC&Headphone amp | DAC&Headphone amp | Portable DAC&Headphone amp | DAC&Headphone amp | DAC&Headphone amp | DAC&Headphone amp |
| Input | USB | USB/COAX/ OPT | USB/BT/AUX | USB/OPT/COAX1/COAX2/BT | USB/BT/OPT/COAX | USB/BT/OPT/COAX/IIS/AES |
| Output | 6.35mm/3.5mm headphone + RCA | 6.35mm headphone + RCA | 3.5mm/4.4mm headphone | 3.5mm headphone + RCA | 6.35mm/4XLR(HD)+XLR/RCA | 6.35/4.4mm/4XLR(HD)+XLR/RCA |
| Sample Rate | 384kHz/32Bit and DSD256 | 192kHz/24Bit and DSD256 | 768kHz/32Bit and DSD512 | 768kHz/32Bit and DSD512 | 768kHz/32Bit and DSD512 | 768kHz/32Bit and DSD512 |
| TND+N(DAC)@1kHzA-wt | <0.0002% | <0.001% | <0.00009% | <0.00015% | <0.00009% | <0.00006% |
| Max Output Power | 280mW×2@32Ω | 520mw@16Ω | 1000mW×2@16Ω | 1800mW×2@32Ω | 1800mW×2@32Ω | 1900mW×2@32Ω |
| Headphone matching impedance | 32Ω~300Ω | 16Ω~300Ω | 16Ω~600Ω | 32Ω~300Ω | 32Ω~300Ω | 32Ω~300Ω |
| Power input | USB-B | Dc12V 1A~3A | DC5V/1.2A(USB TypeC port) | DC15V/1A@DC base 5.5*2.1 | 100-240VAC 50Hz/60Hz | 100-240VAC 50Hz/60Hz |
| MQA Renderer |  | |||||
| Remote control | | | | |||
| Dimensions/Weight | 3.9x3.9x1.3in/0.6lb | 5.7x3.9x1.4in/1.1lb | 5.5X2.8X0.7in/0.6lb | 4.7x6.5x1.6in/0.9lb | 7.1x5.8x1.8in/1.6lb | 8.7x7.1x1.7in/2.4lb |