Feature

●6" Air Sanders Hook and loop face design with hook and loop function
●6" pneumatic Sanders
●sander tools, A built-in regulator in sander allows you to adjust the speed with which you work to satisfy your different sanding, polishing and waxing requirements, for quick and accurate results.
●Suitable for iron, wood, plastic, metal, rubber, stone, marble and other materials grinding, fine polishing.
●Different type of sandpaper can be installed with the different type of disc.


Description

6 inches random orbit air sander feature:

  • 6" air sanders hook and loop face design with hook and loop function.
  • 6" pneumatic sanders.
  • Sander tools, a built-in regulator in sander allows you to adjust the speed with which you work to satisfy your different sanding, polishing and waxing requirements, for quick and accurate results.
  • Suitable for iron, wood, plastic, metal, rubber, stone, marble and other materials grinding, fine polishing.
  • Different types of sandpaper can be installed with a different type of disc.
  • Long-time working without fatigue.
  • Fast sanding speed and high working efficiency.
  • 40Cr Cylinder.
  • Ergonomic design for increased comfort and convenient level.
  • High rotation speed.

6 inches random orbit air sander technical specifications:

  • 6" hook and torus pad (diameter 6 Inches /150mm).
  • Air sander net weight with 6 inches pad: 1020g.
  • Length: 150mm.
  • Height: 95mm.
  • Average air consumption: 8 CFM (226L/min).
  • Non-load rotation: 10000 rpm.
  • Orbit diameter: 3/16".
  • 1/4 NPT quick connector. (American standard).

Sander should be kept dry and can not be stored in a humidor open-air place.

(NOTE: our sander can not be used for wet grinding, if needed, please purchase the specialized water mill tools. )

Whats in the Box:

  • PROSHI random orbital sander with 6 inches pad 1 pcs.
  • 22 mm pad wrench 1 pcs.
  • Instruction manual 1 pcs.
  • American standard 1/4 NPT quick connector 1 pcs.

Different angle views for 6 inches random orbit air sanders

Random Orbit Air SandersRandom Orbit Air Sanders

Random Orbit Air Sanders 6 InchesRandom Orbit Air Sanders 6 Inches

6" Random Orbit Air Sanders 6" Random Orbit Air Sanders

sell Random Orbit Air Sanderssell Random Orbit Air Sanders

6 Inches pneumatic sanders

Ergonomically designed for the counterweight, by reducing vibration for decreased user fatigue. Anyone can be the captain of your Home Improvement. no hesitate, just add it to your cart!

6-Inches hook and loop face

6 Inches (15cm diameter pad) air sander hook and loop face design with hook and loop function. easy change different sandpaper. different type of sandpaper can be installed.

Precision-balanced motor for an air sander

The precision-balanced motor operates smoothly for greater comfort and control, the low-profile, balanced design optimizes the performance of pair sander. aluminum body and durable composite cover reduce cracked.

6" air sander accessories

American standard pneumatic connector, 1/4 NPT quick connector.

wrench for replacement the sander pad.

More views for 6 inches random orbit air sanders

RANDOM ORBIT AIR SANDERSRANDOM ORBIT AIR SANDERS

AIR SANDERAIR SANDER

RANDOM ORBIT AIR SANDERS REPLACE PADRANDOM ORBIT AIR SANDERS REPLACE PAD

Inside view for random orbit air sanders

Inside view for random orbit air sanders, random orbit.

Air inlet view for random orbit air sanders

The air inlet has a filter to prevent foreign matter from entering, and the air inlet is also a pneumatic oil filler port.

Random orbit air sanders replace pad

Use a wrench to insert the gap between the pad and the sander, find the wrench and rotate the disc to remove and replace the disc.

6 INCHES RANDOM ORBIT AIR SANDERS6 INCHES RANDOM ORBIT AIR SANDERS

Instruction manual for 6 inches random orbit air sanders

  • Please check off all tightening parts of the tools to be in good condition before operation.
  • Working pressure to be 6.3 kg/cm3 (90PSI) at operation.
  • Please refer to Figure 1 for the tool installation. To install a filter and a lubricator/oiler at an air outlet
  • The best hand stress on the tool is from 5Kg to 7Kg when operation.
  • Release the air supply when replacing the sandpaper or the backing pad.
  • Wear protection glasses, eye protector, dust mask and gloves at operation.
  • Have a short break in every 30minutes to avoid any possible injury due to tiredness.
  • Do not have free rotating at high speed to avoid possible injury to the human body and possible tool damage.
  • Do not touch the rotating part of the tool with your hand or your body at operation.
  • Start your sanding job after you fit the sanding pad flat on the surface you are working on. Please refer to Figure 2.

RANDOM ORBIT AIR SANDERSRANDOM ORBIT AIR SANDERS

Routine maintenance for 6 inches random orbit air sanders

  • Stop your Job when finding any irregular sound or vibration at operation and then check and repair the tool.
  • Because you are using clean compressed air at operation. Use an air filter at the air installation to clean the dust out of the compressed air.
  • Drop some Oil to the inlet of the tool and then run the tool slowly for a minute and finally start your work...Auto Lubricator/oiler is recommended.
  • Any dirt dust inside the motor may result in slow rotation even block running, at this time, try to drop some oil from the inlet, see whether solve the problem or return to the seller for maintenance.
  • Do release the water out of the air compressor and air hose after an operation.
  • Maintain tools with care. Keep tools clean for better and safe performance, follow instructions for lubricating. Inspect tools cords and air hoses periodically, if damaged, have them repaired by an authorized technician.

AIR SANDERSAIR SANDERS

Application for 6 inches random orbit air sanders

Suitable for iron, wood, plastic, metal, rubber, stone, marble and other materials grinding, fine polishing.

Product information