Feature

●MATERIAL: Made of carbon steel with quenching treatment, the wire grip is heavy duty, high strength and hardness
●CAPACITY: Fits cable in 5/32 inch to 7/8 inch (4mm-22mm) diameter. With the high strength material, it has strong resistance to tensile or tension force, the max safe load is 2 Ton/4408 Lb
●SAFE CONSTRUCT: The jaw with fine threaded design makes it non-slip meanwhile minimizes the damage to cable; And equipped with a cover plate as safety device, it’ll prevent the jump line
●FUNCTION: The whole wire grip is 9.5” x 3.75” (L x W), portable to carry, can be used to adjust the tightness of wires or ropes, solve sag issue of overhead power lines, or pull steel cable
●MULTIUSE: Tightening ropes, dock cable, installing zip line, stretching barbwire. And for electricity engineering, industry infrastructure and agriculture projects such as factory construction, metallurgy, bridge, mine and well building


Description

Our wire grip is made of high quality carbon steel which is strong and durable. It fits for cable from 5/32 inch to 7/8 inch , the maximum load is 2 Ton / 4408 Lb.
The whole wire grip is 9.5” x 3.75” (L x W), portable to carry, can be used to adjust the sag issue of overhead power lines, pull steel cable or tighten wires.


Specifications:
Material: Carbon Steel
Max Load: 2 Ton / 4408 Lb
Fits Broad Range of Cable Diameter:5/32 inch to 7/8 inch (4mm-22mm)
Package Includes:
1×Wire Grip
Note:

Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
Do not exceed rated capacity. When used on/near energized lines, ground, insulate, or isolate grip before pulling.
Grips are to be used for temporary installation, not for permanent anchorage.