Feature
Description
AT-XP 12.5-oz. High-Strength Acrylic Anchoring Adhesive Cartridge w/ Nozzle
Simpson Strong-Tie AT-XP is an acrylic-based high-strength anchoring adhesive. AT-XP is a 10:1 ratio, two-component, anchoring adhesive formulated for anchoring threaded rod and rebar into concrete (cracked and uncracked) and masonry (uncracked) under a wide range of conditions. AT-XP adhesive dispenses easily in cold or warm environments and in below-freezing temperatures with no need to warm the cartridge. When mixed properly, AT-XP is a teal color and has a substrate installation temperature range from 14F (10C) to 100F (38C).
|
|
|
|
|
|---|---|---|---|
Formulated for robust applicationsSimpson Strong-Tie adhesive anchors are formulated for high design strength and proven performance |
Formulated for the toughest environmentsHigh-strength anchoring adhesive can be installed in extreme concrete temperatures and in dry or water-filled holes in concrete |
Acrylic adhesives no matter the weatherAT-XP adhesive dispenses easily in warm weather and in below-freezing temperatures without cartridge warming |
Adhesive dispensing tips and tricksSteel carriage dispensing tools built for continuous, high-volume use |
|
|
|
|
|
|---|---|---|---|
Seismic upgradesSET-3G high-strength epoxy adhesive delivers superior bond strengths enable ductile solutions in high seismic areas |
Anchoring holdownsThe SSTB provides optimum performance as an anchor for holdowns and Simpson Strong-Tie shearwalls |
Crack repairRepair cracks in concrete ranging from 1/64" to ¼" wide |
Highway applicationsET epoxy ideal for highway/DOT projects |
|
|
|
|
|
|---|---|---|---|
Epoxy and holdownsHigh strength to resist seismic forces |
Manual dispensing toolsDesigned to fit adhesive cartridges |
Retrofit boltsAnchor into existing concrete |
Consistent dispensingEnjoy consistent mixing for 22 oz. and 56 oz. epoxy cartridges |
