Feature
●Perfectly Fit: Our climbing ring replacement kit is compatible with Dolphin Robotic Pool Cleaners like M200, M400, M500, Nautilus, Nautilus CC Plus, DX3, DX4, DX6, Aquarius XL, Premier, Oasis Z5i.
●Great Value: The package comes with all four climbing rings 6101611-R4, also fit Sigma, Triton (old), Deluxe 4/5, Apollo Plus, Wave 65, Endeavor, Edge, HD, Saturn (old), Atlantis, Apollo, 3001, 2X2, Wave 2X2, Prowler 820/83
●Premium Quality: Our replacements are made from PVA; ensure to last longer. They are perfect for maintaining your pool safe and functioning properly.
●Manufacturer Warranty: All parts come with 60-day hassle free return policy, so if you have any issue using the product, simply reaching out to us and we will issue the 100% refund.
●Simple installation: Soak climbing ring thoroughly in water until they expanded and softened enough to install on rollers. Slide them in slowly and ensure that they are sitting in their designated space.
Description
No-Hassle Installation Process
Once you know the basics, it will become easier to disassemble, remove parts, and then replace the worn-out parts of your Dolphin pool cleaner. But the exact process may vary from model to model. This installation guide is based on the replacement instructions for Dolphin Nautilus combined brushes and climbing rings.
- Open the sides of the pool cleaner, You will need a screwdriver to remove the 4 screws on the side panel.
- Remove the tracks on each side/end of the opened pool cleaner.
- Snap out the ends of the brush roller, one end after the other.
- Only when both ends are snapped out that you can lift the brush roller out of the pool cleaners frame.
- Use a flathead screwdriver to pry the small cap off the end of the brush rollers center tube.
- Remove the rollers center tube and then remove the gear caps.
- CAUTION: Check the climbing rings pliability. Whether you are replacing both or just the climbing rings, dried-out foam rollers are difficult to remove and may damage the brushes. Soak the brush roller in water until they become softer and more pliable.
- Slide the climbing rings off the brush rollers.
- Install the new climbing rings. When you receive the new rings, please soak it thoroughly in water in order to prepare the product for optimal usage. Be careful in installing the climbing rings. Slide them in slowly and ensure that they are sitting in their designated space.
- Reassemble the brush roller assemblies, replace them in their designated slots, return the tracks, and screw back the side panels.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| 3pk Black Pool Cleaner Tires, 48-232 Replacement | 2pk Gray Pool Cleaner Timing Track, Manufacturer Code 9985006-R2 | 2pk Replacement Gray Tracks, Part Number 9983152-R2 | White Weir Gate Assembly, Replacement 516252, 8 1/2 Inches x 5 3/8 Inches | White Weir Gate Replacement, Part Number 08650-0022, 8 1/2 Inches x 5 1/8 Inches | 2pk 4-oz All Purpose Epoxy Putty Stick, Pool Bounding Kit | |
| SUITABLE FOR | Compatible with Zodiac Polaris Black Max suction-side pool cleaner models, Polaris pressure pool cleaners (Polaris 3900 Sport, Polaris 480 Sport Black Max), and Leslies Pool Supply exclusive model Polaris P39 pressure side pool cleaner | For Pool Cleaner Models from 2006 to Present Part Number 3295-133, Manufacturer Code 9985006-R2 | For Maytronics Dolphin Robotic Pool Cleaners with Part Number 9983152-R2 | part number 516252 is for (compatible with) the replacement weir gate assembly of Bermuda Gunite and Bermuda Vinyl Liner Bermuda Skimmers. This part number is interchangeable with PacFab Bermuda part number 51-6222 | Part Number 08650-0022, compatible with Sta-Rite U-3 Vinyl Liner Skimmer and Automatic Surface Skimmer. This part number has the same specifications and is therefore interchangeable with part number 08650-0022A | 2-in-1 Pool Epoxy, used for pool repair |