Feature

●Superior Feature: The wind turbine generator adopts a three-phase AC permanent magnet synchronous generator with high performance rare earth NdFeB permanent magnets. with low starting wind speed(2.0m/s), low noise（40dp）, beautiful appearance, with attached tools you can set up this wind turbine conveniently.
●Durable Generator: The working temperature of the wind generator kit is -40°C~80°C, and the wires are heat-resistant and moisture-proof,suitable for all weather conditions and all seasons. long service life up to 20 years.
●Excellent Blade: The fan blades are made of reinforced fiber nylon, which is more flexible and has a high safety factor, it is light in weight and can run very quickly (2.0m/s). The unique magnetic circuit design makes the starting torque very small, which can effectively ensure the breeze starting ability of the fan.
●MPPT Controller: The wind power generator is controlled by MPPT intelligent microprocessor, which can effectively adjust the current and voltage,the current and voltage regulation is effective（12V/24V）, the utilization rate of wind energy is high, which contributes to the annual power generation.
●Wide Application: The windmill generator with high wind energy utilization and efficiency, so it can be widely used any home usage, such as home monitoring, motor home, boats, gazebos, chalets, marine.


Description

11
wind power generatorwind power generator

wind power generatorwind power generator

Wind Turbine x 1

Blades x 8

Controller x 1

Nose Cone x 1

Set Screws and Nuts x 1

Installation Notes x 1

Anemometer x 1（no battery）

Note:Without tower tube

(We recommend：steel pipes or iron pipes, diameter :55±2mm)

  • Application
  • 1. For Home Use
  • 2. For Monitoring Use
  • 3. For Boat / Marine Use
  • 4. For Wind Solar Hybrid Streetlight Use And More

Rated power:600 W

Maximum power:650 W

Number of blades:8

Rated voltage:12/24 V

Start-up wind speed:2.0 m/s

Rated wind speed :13 m/s

Working speed:3-25 m/s

Survival wind speed:40 m/s

Wind wheel diameter: 29.5in/75cm

  • Blade Material: Nylon Fiber
  • Generator Type: 3-Phase AC Permanent Magnet Generator
  • Braking Method: Electromagnetic
  • Wind Direction Adjustment: Automatically Adjust The Windward Angle
  • Operating Temperature: -40 ~ 80 ℃
  • Magnetic Material: Neodymium Iron Boron
  • Cabin Material: Die Casting Aluminum Alloy

11

wind turbine generatorwind turbine generator

wind turbine generatorwind turbine generator

Efficient Generator

Three-phase permanent magnet synchronous motor. Efficient and compact ac generator with high performance NdFeB permanent magnet.

High Quality Material

The blade material is made of high-strength plastic with 30% carbon fiber and anti-UV anti-corrosion material, which is both beautiful and durable.

Easy to Install

Nesting the black leather cushion inside the reducing joint of the wind turbine then putting the tower inside reducing joint. Connecting the cover of reducing joint by screws and fastening. Tightening the screws by hex key.

wind generator kitwind generator kit

1. The wind turbine should be installed where there is strong wind or no tall buildings and obstacles, If installing the wind turbines near the obstacles, the position is better as far as possible from obstructions, or the installation height should be 20Ft higher than the top of obstructions(As show), which can make full use of the wind power.

2. We can make use of the growth effect on the hills (As show). It’s a good place to set up

3. Its should avoid the cliff, the turbulent region.