Feature

●The 90-degree head allows flexibility in many applications, for reaching tight or angled grinding.
●Variable-speed throttle ramps up to maximum RPM, Built-in air regulator for precise speed control.
●Lightweight aluminum body, Rear exhaust, Durable ball-bearing motor.
●Sealed ball bearing design keeps out contaminants promoting smooth operation.
●Suitable for precision machining, smoothing, chamfering, deburring, grinding, polishing, engraving.


Description

1/4-inches angle air die grinder feature:

  • The 90-degree head allows flexibility in many applications, for reaching tight or angled grinding.
  • Variable-speed throttle ramps up to maximum RPM, built-in air regulator for precise speed control.
  • Lightweight aluminum body, rear exhaust, durable ball-bearing motor.
  • The sealed ball-bearing design keeps out contaminants promoting smooth operation.
  • Suitable for precision machining, smoothing, chamfering, deburring, grinding, polishing, engraving.
  • Stepless speed control knob switch: according to different purposes, choose different speeds to meet different needs
  • Air inlet and exhaust port: air inlet filter design, effectively filter air impurities, humanized annular exhaust design.
  • Industrial grade 1/4" collet: high concentricity, small yaw, low vibration, high wear resistance, no heat, stable operation.
  • Plate-type start-stop switch: safe pressure plate type start-stop switch, more reliable and more reliable.
  • 1/4" (6.35mm) high-precision collet: high-temperature carburizing, adapt to greater impact strength, precision CNC lathe processing, not easy to deform, bolt. specifications: M6

1/4-inches angle air die grinder technical specifications:

  • Collet size 1/4" (6.35mm).
  • No-load speed: 20000 RPM.
  • Air consumption: 2.8 CFM, 80L/min.
  • Pressure: 90 Psi.
  • Power: 0.6HP.
  • Air inlet specification: Air Inlet: 1/4" (American standard connector).
  • Product net weight: 0.49Kg.

Whats in the Box:

  • PROSHI 1/4-inches angle air die grinder 1 pcs.
  • Wrench 2 pcs.
  • Backup 1/8" (3.18mm) collet 1 pcs.
  • Instruction Manual 1 pcs.
  • American standard 1/4 NPT quick connector 1 pcs.

Different angle views for 1/4-inches angle air die grinder

1/4-Inch Angle Air Die Grinder1/4-Inch Angle Air Die Grinder

Mini Air Angle Die GrinderMini Air Angle Die Grinder

pneumatic angle die grinderpneumatic angle die grinder

90 Degree Angled Air Die Grinder90 Degree Angled Air Die Grinder

1/4-inches angle air die grinder full set of accessories

1 pcs collet size 1/4" (6.35mm) already installed in angle air die grinder. in the box include 1 pcs 1/4" NPT American standard quick connector and 2 pcs wrench. and 1 pcs added 1/8"(3.18mm) collet.

1/4-inches angle air die grinder side view

Industrial grade 1/4 inch collet, high concentricity, small swing, low vibration, high wear resistance, balanced operation.

1/4-inches angle air die grinder rear view

Stepless speed control knob switch, according to different purposes, choose different speed. The platen type starts and stop switch is safer and more reliable.

1/4-inches angle air die grinder oblique view

The 90-degree head allows flexibility in many applications, for reaching tight or angled grinding.

More views for 1/4-inches angle air die grinder

Edge Series Air Angle Die GrinderEdge Series Air Angle Die Grinder

Air Die GrinderAir Die Grinder

Air Angle Die GrinderAir Angle Die Grinder

1/4-inches angle air die grinder dimensional measurement

1/4-inches angle air die grinder only 157 mm in length, 78 mm wide, handle diameter 33 mm, lightweight, more suitable for long hours of work.

1/4-inches angle air die grinder air inlet view

The air inlet has a filter to prevent foreign matter from entering, and the air inlet is also a pneumatic oil filler port.

Collet or grinding head installing

Show how to install collet or grinding head for 1/4-inches angle air die grinder, the wrench is included in the sales package and the grinding head is not included.

1/4-INCHES ANGLE AIR DIE GRINDER1/4-INCHES ANGLE AIR DIE GRINDER

Instruction manual for 1/4-inches angle air die grinder

  • Please check off all tightening parts of the tools to be in good condition before operation.
  • Working pressure to be 6.3 kg/cm3 (90PSI) at operation.
  • Please refer to Figure 1 for the tool installation. To install a filter and a lubricator/oiler at an air outlet
  • Release the air supply when replacing Grinding head.
  • Wear protection glasses, eye protector, dust mask and gloves at operation.
  • Have a short break in every 30minutes to avoid any possible injury due to tiredness.
  • Do not have free rotating at high speed to avoid possible injury to the human body and possible tool damage.
  • Do not touch the rotating part of the tool with your hand or your body at operation.

1/4-Inches Angle Air Die Grinder1/4-Inches Angle Air Die Grinder

Routine maintenance for 1/4-inches angle air die grinder

  • Stop your ob when finding any irregular sound or vibration at operation and then check and repair the tool.
  • Because you are using clean compressed air at operation. Use an air filter at the air installation to clean the dust out of the compressed air.
  • Drop some Oil to the inlet of the tool and then run the tool slowly for a minute and finally start your work...Auto Lubricator/oiler is recommended.
  • Any dirt dust inside the motor may result in slow rotation even block running, at this time, try to drop some oil from the inlet, see whether solve the problem or return to the seller for maintenance.
  • Do release the water out of the air compressor and air hose after an operation.
  • Maintain tools with care. Keep tools clean for better and safe performance, follow instructions for lubricating. Inspect tools cords and air hoses periodically, if damaged, have them repaired by an authorized technician.

Angle Air Die GrinderAngle Air Die Grinder

1/4-inches angle air die grinder application

Suitable for precision machining, smoothing, chamfering, deburring, grinding, polishing, engraving.

Looking for specific info?