|
|
|
|
---|---|---|---|
Equip with 2 ColletsThis straight air die grinder is equipped with a 1/4” (6mm) collet and a 1/8” (3mm) collet. Compatible with a variety of grinding bits, ideal for all kinds of materials. You can choose the most suitable collets for your needs to bring the highest efficiency. |
Extended ShaftOur air grinder tool features an extra 5 inch extended reach for working in tight, confined spaces that regular-sized surface grinders cannot reach Ideal for confined tight space and hard to reach area. |
Adjustable Rotate SpeedPlease note that a screwdriver is required to adjust the rotate speed The ability to adjust the rotation speed allows you to customize the machines performance based on the specific sanding task at hand. The maximum rotate speed can reach 23,500 RPM. Higher speeds may be suitable for rough sanding, while lower speeds can provide more precision and control for delicate surfaces. |
Easy to Replace Collet(1) Disconnect the air hose. (2) Use the matched Spanner to twist the Balance Shaft for loading or removing. (3) Replace the collet (4) Install the cartridge clip. (5) Install the Grinding head and tighten with a wrench. |
MT-5105 | MT-5105V | MT-5306F | MT-5306R | MT-5306R1 | |
---|---|---|---|---|---|
Type | Air Orbital Sander | Air Orbital Sander | Air Die Grinder | Air Die Grinder | Air Die Grinder |
Frequency | 12,000 RPM | 11,000 RPM | 18,500 RPM | 23.500 RPM | 23.500 RPM |
Power Source | Air Powered | Air Powered | Air Powered | Air Powered | Air Powered |
Air Pressure | 85 - 115 PSI | 85 - 115 PSI | 85 - 115 PSI | 85 - 115 PSI | 85 - 115 PSI |
Air Inlet | 1/4" NPT | 1/4" NPT | 1/4" NPT | 1/4" NPT | 1/4" NPT |