❤Connecting instruction:
Step 1: Open your Wii console, insert 2 AA batteries (not included) into the wii remote then turn on remote;
Step 2: Press SYNC button in the remote controller;
Step 3: Press the red button in the wii console in a short time.
Connection is successful when only 1 light are on (press "reset" in wii console if 4 lights do not stop flashing, repeat steps 2 and 3).
❤If the connection is lost, please check:
1. If the battery voltage is below 2.3V, the connection may be broken. Please change to new batteries;
2. The batteries could be loose;
3. Please do not place the controller too close or too far from the Wii host. Keep the distance within 196 inchs.
4. You can try holding down the red button on the back of the controller (SYNC button) and the SYNC button on the Wii console once again.
❤Advanced Connecting instruction:
If the wii remote cannot be connected to the wii console according to the above method, please try the following method.
(1) Clean up the previous Bluetooth connection of your console.
(2) Press the power switch of the Wii Console for more than 4 seconds.
(3) After confirming that the power light turns red,unplug the AC adapter.
(4) Please unplug the battery of the Wii remote and wait for about 1 minute.
(5) Please plug in the AC adapter.
(6) Insert the battery into the Wii remote control and press the power switch of the Wii Console.
(7) Simultaneously press the red sync button on the Wii Console and Wii remote.
❤Specifications:
Cable length: 39.3 inches
Remote size: 5.7 x 1.3 x 1.1 inches
Bluetooth control distance: about 196 inches
❤Package Included:
1 x Black wii remote (without battery)
1 x Dark blue wii remote (without battery)
1 x Black silicone case for remote
1 x White silicone case for remote
1 x Black wirst strap
1 x Dark blue wirst strap