Dynatex dielectric grease is a silicon dioxide thickened, very high molecular weight dimethyl polysiloxane based material. It is an extremely stiff, tacky, tenacious compound with excellent water repellency even to seawater. It has outstanding high temperature and vacuum capabilities as well. Moisture proof. Prevents corrosion. Displaces moisture in ignition and electrical systems. Keeps battery terminals corrosion free. Prevents voltage leakage. Typical applications: spark plug boots, distributor cap nipples, battery terminals, ignition coil connectors, headlamp connectors, trailer electrical connectors, bulb sockets, high energy ignition systems. Restrictions: do not use with highly oxidative chemicals such as liquid oxygen, chlorine or peroxides, nor surfaces to be painted. Not for use as a lubricant for metal-to-metal surfaces. Toxicity: Dynatex dielectric grease has not been known to produce any lasting harmful effects. Contact with the eyes may cause transitory irritation, which usually disappears in a few hours. If Contact with the eyes occurs, flushing them with water will relieve and reduce the discomfort. Appearance: translucent paste. Penetration (worked 60x): 240. Bleed (200 degree C-24 Hrs): 0.1 percent. Evaporation (200 degree C-24Hrs): 0.6 percent. Dielectric strength (50 mil): 710 V/mil. Dielectric constant (1 KHz): 2.9. Volume resistivity (Ohm-cm): 4.5 x 10(13). Dissipation factor (1 KHz): 0.0005. Specific gravity: 1.03. Temperature range: -4 degree to 200 degree C (-4 degree to 400 degree F). Suggestions of uses should not be taken as inducements to infringe any patents. ISO Certified.