Feature(may vary by option.)

●★They are 1" diameter and just over 2" long
●★It will stop the leaking and gain the horsepower
●★Made of a heat resistant silicone,which can be used for long time and wont melt or leak (Note:Do not rev the engine at high speeds while in neutral.Improper use may cause damage to the item.)
●★High temperature 5 ply pipe connector with clamps.These are rated up to 500 degrees, and will not melt(Burning temperature:outer layer 260 ° C, inner layer 550 ° C)
●★Fit For Banshee YZF350 YFS200 Raptor Blaster KX80 KX125 KX250 CR80 CR125 CR250 CR450 TRX250R CR KX RM and Quads Dirt Bikes (also fit fmf,dg & factory exhausts)

[Red]




[Black]





Description

High Temp Exhaust Couplings Clamps 1"ID

High Temp Exhaust Couplings Clamps 1"IDHigh Temp Exhaust Couplings Clamps 1"ID

Fitment

Installed picture is of a clamp on a blaster. also fits many other quads and dirt bikes

For Kawasaki KX80 KX125 KX250 Mojave

For Honda CR80 CR125 CR250 CR450 TRX250R

For Yamaha Banshee All Year YFS200 Raptor Blaster

These will fit the stock OEM factory pipes, as well as most aftermarket ones including Toomey T3, T4, T6/ FMF Fatty/ Gold/ SST or Gnarly/ Pro Circuit/ DG/ Bills/ DMC/ Paul Turner/ LRD/ Rocket/ R2 Etc...

(Kindly remind,this will also fit others pipes. Please check the size of your pipes. To confirm that it is 1" id.)

Product Details

Product DetailsProduct Details

Product DetailsProduct Details

Product DetailsProduct Details

Condition: Brand new and Unused

Quantity: 1 Piece ( Black/Red extreme 5 ply 1"ID. Exhaust couplings )

Size:This is 1" ID by a round 2" long.

Material:This is made of a heat resistant silicone,which can be used for long time.It wont melt or leak.

  • High quality and durable
  • Stable characteristics,High reliability.
  • Use safe material and will not do harm to your vehicle.

Description

1.These are made with a Silicone Elastomer, with a woven polyester fabric vulcanized and cured

2.It will stop the leaking and gain the horsepower!!!

3.High temperature 5 ply pipe connector with clamps.These are rated up to 500 degrees, and will not melt!

(Burning temperature:outer layer 260 ° C, inner layer 550° C)

4.That means they are strong, flexible, and very resistant to heat,chemicals, and breaking or tearing!

5.It is a aftermarket tough and great looking part.

6.These use the stock factory mounting hose clamps for that clean look.

7.This is what goes in-between the head pipe and the silencer.This will not leak.

8.They are 1" diameter, and just over 2" long

Note:

Do not rev the engine at high speeds while in neutral.

（Because When the motorcycle is parked,the engine running without load can cause a rapid increase in temperature.Improper use may cause damage to the item）

If you are unsure how to correctly install the high-temperature exhaust pipe joint clamp, seek the assistance of a professional.

Installation Steps

1. Ensure the exhaust pipe system has cooled to a safe temperature. High-temperature exhaust pipes can be very hot, so make sure the exhaust pipe has cooled down to a safe temperature before installation to avoid burns.

2. Clean the exhaust pipe connection. Use a brush or detergent to clean the exhaust pipe connection, ensuring there are no debris, dirt, or grease that may affect the installation.

3. Prepare the high-temperature exhaust pipe joint clamp. Ensure the interior and exterior surfaces of the clamp are clean and free of any obstacles.

4. Place the clamp onto the exhaust pipe connection. Ensure the clamp fully wraps around the exhaust pipe connection and fits tightly against it.

5. Secure the clamp in place using bolts or fastening clips. Depending on the design of the specific clamp, use the appropriate tools to secure the clamp onto the exhaust pipe connection.

6. Check the installation. Ensure the clamp is securely fixed in place without any signs of looseness or movement. Also, ensure the clamp is not damaged or deformed.

7. Test the exhaust pipe connection. Start the engine and let it run for a period of time, observing if there are any signs of gas leakage at the exhaust pipe connection. If any leaks are found, immediately shut down the engine and check if the clamp is properly installed.

Product information