Feature(may vary by option.)

●-This hardware, with the firmware for SimonK, gives you the perfect solution for multirotor use
●-Highest efficiency 100% N-FET design.
●-Super high refresh rate, no buffering of the input signal, resulting in more than 490Hz response rate.
●-16KHz motor frequency, giving fastest response of the motor, and quietest operation as well (no 8KHz squeal).
●-Super simple, foolproof operation! Nothing to program other than the throttle range.

[20a (2-3s)]





Description

For Simonk 10A 12A 15A 20A 30A 40A 50A 70A 80A OPTO ESC Firmware Electronic Speed Controller

-No low voltage cutoff, because any cutoff in a multirotor=crash.
-No over temp cutoff, because any cutoff in a multirotor=crash.
-Dont buy a 30A multirotor ESC that doesnt meet all these criteria! There are a lot of low quality 30A ESC out there!

For Simonk 10A (2-3S):
Weight: 10g;
Size: 23.5x15x 6.1;
Input voltage: (2-3s Lixx);
Drive current: 10A (Max: 13A/10S);
BEC Input: 3V1A;
Compatible signal frequency: 30Hz-499Hz;

For Simonk 12A (2-3S):
Weight: 12g;
Size: 28*20*6.1;
Input voltage: 2-3S Lixx;
Drive current: 12A (Max:14A/10S);
BEC Input: 5V2A;
Compatible signal frequency: 30Hz-499Hz;

For Simonk15A (2-3S):
Weight: 15g;
Size: 50*22*8;
Input Voltage: 2-3S Lixx;
Drive current: 15A (Max:25A/10S);
BEC Input: 5V2A;
Compatible signal frequency: 30Hz-499Hz;

For Simonk 20A (2-3S):
Cont Current: 20A;
Burst Current: 28A;
BEC Model: Linear mode;
BEC Output: 5V3A;
Li-ion/Li-poly:2-3S,or Ni-MH/Ni-Cd:4-12NIMH;
Weight: 21g;
Size: 32*24*7mm;
Simonk 30A (2-4S):
Max cont. current: 30A;
Peak current: 40A(10s);
Voltage: 2-3Slixx;
BEC: 5V/3A;
Size: 50x23x8mm;
Weight: 28g;

For Simonk 30A-OPTO (2-6S)
Weight: 25g;
Size: 50*23*8;
Input voltage: (3-6S Lixx);
Drive current: 30A (Max:40A/10S);
BEC Input: NO;
Compatible signal frequency: 30Hz-500Hz;
Simonk 40A (2-4S):
Weight: 35g;
Size: 68*25*8MM;
Input voltage: 2-4S;
Drive current: 40A (Max:50A/10S);
BEC Input: 5V 3A;
Compatible signal frequency: 30Hz-500Hz;

For simonk 50A-OPTO (2-6S):
(the ESC need the power from receiver or the flight control)
Weight: 48g;
Size: 53*32*10;
Input voltage: (2-6S Lixx);
Drive current: 50A (Max:60A/10S);
BEC Input: NO;
Compatible signal freque