Feature

●🚗[Fuel Sender Material]: Fuel sending unit is made with heavy duty stainless steel. This water level sensor is reed switch, durability and reliability, steady output signal. No adjustment needed for tank. The fuel level sender is suitable for Boat, Auto,Trucks, Buses and Marine field.
●🚙[American Standard Output]: Length range of fuel tank sender to choose: 5 inch-18inch. The Fule/Water Level Sensor with American standard output 240-33 ohms (240 ohms at empty, 33 ohms at full).
●🧭【Fuel Gauge】The marine fuel gauge diameter is 2-1/16 inch (52mm). The boat fuel gauge is made of 316L Metal, Rubber and Plastic. Scratch resistant curved glass lenses. 7 color backlight : red、green、blue、yellow、olivine、orange、purple.
●🚌[Easy to Install]: SAE 5 hole mounting pattern, easy to install and hookup. The well-written and illustrated instructions are straight forward that will easy to follow. The package comes with 1 x Sensor, 1 x Gasket, 5 x Screws and 1 x instructions; 1x fuel gauge.
●⭐⭐⭐⭐⭐[Attention]: 1 inch(25mm) clearance must be maintained between the tank bottom and the float retaining collar in addition to adjacent side or baffle of tank. Please contact us if you are dissatisfied with our products, the response will be taken in 34 hours and provide proper solutions.

[240-33ohm Sender+ Gauge 6  Sender+Gauge]




[240-33ohm Sender 7  ]




[0-190ohm Sender 18  ]




[240-33ohm Sender+ White Gauge 6  Sender+Gauge]





Description

fuel sending unitfuel sending unit
Fuel Level Sensor unitFuel Level Sensor unit

Sensor Wire connection:

Brown-----Signal output

Blue ----Negative(-)

Attention:

240-33 ohm sensors can only be applied to 240-33 ohm fuel gauge. -Empty oil level 240 ohm, Full oil level 33 ohm.

The sensor can not be connected to the power supply, can not be connected to the positive electrode, does not need to be connected to the power supply, it is connected with the gauge signal directly

fuel gauge sending unitfuel gauge sending unit
Marine Fuel Sending unitMarine Fuel Sending unit

Specifications:

- Protection Rank: IP67

- Resolution range: 10-21 mm

- Assembly: SAE standard 5 holes

- Rated current for alarm switch: 500mA

- Output signal: 240~33 ohm

- Operating temperatures: - 40 to 85 Celsius

- Fit for Fuel Level Gauge and Water Level Gauge

- Mounting: 5 pieces of M5 screws and 2 mm thick gasket

marien fuel gaugemarien fuel gauge
FUEL SENDING UNITFUEL SENDING UNIT

Boat sending unitBoat sending unit

boat fuel gaugeboat fuel gauge

boat fuel sending unitboat fuel sending unit

Material

Fuel tank sending unit is made with heavy duty 316 stainless steel.

Waterproof

Output signal to choose

240-33ohms: 240 ohms at empty, 33 ohms at full.

0-190 ohms: 0 ohms at empty, 190 ohms at full.

Brand in this category on Amazon

Sponsored