Feature

●[Material]: Fuel tank sending unit is made with heavy duty 316 stainless steel. This water level sensor is reed switch, durability and reliability, steady output signal. No adjustment needed for tank.
●🚗[American Standard Output]: The Fule/Water Level Sensor with American standard output 240-33 ohms (240 ohms at empty, 33 ohms at full). The fuel sending unit comes with 1 x Sensor, 1 x Gasket, 5 x Screws and 1 x instructions.
●🚗[Easy to Install]: SAE 5 hole mounting pattern, easy to install and hookup.The well-written and illustrated instructions are straight forward that will easy to follow. The fuel level sender is suitable for Boat, Auto,Trucks, Buses and Marine field.
●🚢【Wide Applicability】 This boat fuel gauge compatible with most American Standard (240 - 33 Ohm) sending units. Applicable for Cars, Trucks, Tractors, Vehicle Diesel to Match Fuel Sending Unit for Diesel Oil/ Gasoline Level Monitoring. High sensitivity and easy operation.
●🧭【Material】The fuel level gauge diameter is 2-1/16 inch (52mm). The marine fuel gauge is made of 316L Metal, Rubber and Plastic. Scratch resistant curved glass lenses. The fuel gauge will accurately display fuel level remaining in your gas tank. This gauge have 7 backlight color : red、green、blue、yellow、olivine、orange、purple, totally 7kinds different backlight color, it will change automatically every 1 minute. You can fix only one color you like by pressing the gauge back "set" button.


Description

fuel sending unitfuel sending unit
Fuel Level Sensor unitFuel Level Sensor unit

Sensor Wire connection:

Brown-----Signal output

Blue ----Negative(-)

Attention:

240-33 ohm sensors can only be applied to 240-33 ohm fuel gauge. -Empty oil level 240 ohm, Full oil level 33 ohm.

The sensor can not be connected to the power supply, can not be connected to the positive electrode, does not need to be connected to the power supply, it is connected with the gauge signal directly

fuel gauge sending unitfuel gauge sending unit
fuel sending unitfuel sending unit

Specifications:

- Protection ank: IP67

- Resolution range: 10-21 mm

- Assembly: SAE standard 5 holes

- Rated current for alarm switch: 500mA

- Output signal: 240~33 ohm

- Operating temperatures: - 40 to 85 Celsius

- Fit for Fuel Level Gauge and Water Level Gauge

- Mounting: 5 pieces of M5 screws and 2 mm thick gasket

marien fuel gaugemarien fuel gauge
FUEL SENDING UNITFUEL SENDING UNIT

Boat sending unitBoat sending unit

boat fuel gaugeboat fuel gauge

boat fuel sending unitboat fuel sending unit

Material

Fuel tank sending unit is made with heavy duty 316 stainless steel.

Waterproof

Output signal to choose

240-33ohms: 240 ohms at empty, 33 ohms at full.

0-190 ohms: 0 ohms at empty, 190 ohms at full.