Feature(may vary by option.)
●COATED DRUM HEAD - 14" snare batter drum head made using two plies of film. An outer ply of 7mil and an inner ply of 10mil film
●EDGE CONTROL - Edge Control technology pre-EQs the sound, removing troublesome mid-range overtones that muddy the snare drums sound
●REVERSE DOT - The reverse dot is mounted on the underside of the head for extra durability, focus and attack without getting in the way of brushes
●ALSO AVAILABLE - Also available in a single ply version with the reversed dot and a two-ply version without the reversed dot
●MADE IN THE USA - For over 60 years, Evans has been a pioneer in drum head manufacturing and design. Regarded for high quality and consistency all Evans drumheads are proudly designed, engineered, and manufactured in the USA to the most stringent quality controls in the industry.
[1-Ply 13 Inch]
[2-Ply 14 Inch]
[1-Ply 14 Inch]
[2-Ply 10 Inch]
Description
Product Description
A controlled sound but with resonance and sensitivity at all tuning and dynamic ranges, EC Snare head combines two-plies of film (6.5mil external, 10mil internal) with Evans Edge Control technology to eliminate the mid-range frequencies that muddy up the mix, leaving crisp highs and deep lows. The reverse dot version lends added durability and accentuated attack without choking the overall sound. EC Reverse Dot Snare Series Overview Evans EC snare heads feature two plies of film. The combination of a 7mil top ply and a 10mil bottom provides a controlled sound but with resonance and sensitivity at all tuning and dynamic ranges. Sound Shaping Technology (SST) rings on the underside reduce unwanted frequencies and enhances attack. The Reverse Dot lends extra durability, focus and attack in the center. The revolutionary Evans Level 360 drum head technology is found in the proprietary collar design that extends the level playing surface of the drum head 360 degrees around the drum. This vertically enhanced collar design ensures balanced contact with the critical bearing edge of the drum shell.
From the Manufacturer
EC Reverse Dot Snare Series Overview
Evans EC snare heads feature two plies of film. The combination of a 7mil top ply and a 10mil bottom provides a controlled sound but with resonance and sensitivity at all tuning and dynamic ranges. Sound Shaping Technology (SST) rings on the underside reduce unwanted frequencies and enhances attack. The Reverse Dot lends extra durability, focus and attack in the center.
The revolutionary Evans Level 360 drum head technology is found in the proprietary collar design that extends the level playing surface of the drum head 360 degrees around the drum. This vertically enhanced collar design ensures balanced contact with the critical bearing edge of the drum shell, resulting in:
• Ease of fit
• Ease of tuning
• Extended tuning range and quality of sound
Available on all Evans 6 – 20 inch Batter and Resonant Drum set, Snare Side, Concert and Marching Tenor heads. Evans Level 360 technology solves the age-old dilemma of traditional synthetic heads consistently not fitting a variety of drum shells without using force that chokes the responsiveness of the head and the drum’s performance.
The Level 360 Blueprint
The benefits provided by Evans Level 360 technology stem from a groundbreaking collar design:
Steeper Collar:Extends the level plane of the drum head to ensure balanced contact with the critical bearing edge of the drum shell. Roll-over Hoop:
Provides strength and stability where the film meets the hoop, for greater durability without diminishing performance. Balanced Contact:
For ease of tuning and enhanced quality of sound. Greater Tonal Range:
Wider tuning options result in higher levels of responsivness and resonance, giving you the confidence to tune your drums high or low.