Feature●Flow rate: 15 US gallons/min (57 Litres/min), self-priming from dry up to 1.2m (4ft)●Adds approx 125 lbs (56kgs) of ballast per minute●Reversible to both fill and empty tanks●Simple design means fewer wearing partsDescription
Designed to pump water into wakeboard liquid ballast tanks and when reversed will also pump water out of them. It has a flow rate of 15 gallons per minute, so it can fill most ballast tanks in about five minutes. It is equipped with a Run-Dry Protection Device to automatically shut-off the pump and protect the impeller from run-dry damage should the pump be mistakenly left on after the Ballast Tank is empty.
- Body Materials: Bronze
- Impeller: Jabsco Neoprene compound
- Seal: Lip Type
- Port(s): 1/2" Internal Pipe Threads 1" External Hose Barb
- Voltage: 12 (Vdc)
- Amp Draw: 19 (amp)
- Fuse Size: 25 (amp)
- Motor Type: Equipped with Run-Dry Protection Device Permanent Magnet Type Fully Enclosed Stainless Steel Shaft Ball Type Shaft Bearing Reversible
- Duty Cycle: 30 Minutes Max.
- Dimensions: 9.3 x 20.3 x 12 (cms), 3 5/8 x 8 x 4 3/4 (inches)
- Weight: 3 (kg) 6.6 (lb)