Feature

●Package include - 60 Pcs 1/8" Shank mounted stone grinding wheel heads: 60Pcs（12 SIZE）: 4/5/6/8/10/12 mm Bullet Shape, 4/5/6/8/10/12 mm Cylinder Shape(5 Pcs each size). Convenient to carry and store.Various model to satisfy your need.
●Strong & Durabale Material - Made of upgraded abrasive materials, the grinding stones has good wear resistance, uniform particles. They can be cleaned and restored after long-term use.Glued with a big glob ofglue onto the shaft, each one was well adhered.
●Unique Design - The bullet/cylinder shape grinding bits fit into tight spaces for other grinding and shaping needs. Such as curved, flat and slotted surfaces. Ideal for sanding after beveling holes in metal and wood.
●Great Polishing Effect - Play an excellent polishing effect especially for stainless steel and other metals with low noise and less dust. Wont rust and fall out like the steel brush.
●Wide Application - The abrasive sanding bits are applied in electric drills, cordless drills, die grinders. Used for grinding, polishing, deburring of metal, wood, plastic and dog nail toenail grinder.
●Warm Tip - For your safty, please make sure you wear SAFETY equipment such as a face shield, glasses (or Full Coverage Goggles) and gloves.

[60 Pack 12 Size]




[72 Pack 3 Size]





Description

11

60 Pcs Abrasive Mounted Stone Grinding Wheel

  • Color: Blue
  • Shank Diameter: 3mm / 0.12in
  • Heads Diameter: 4/5/6/8/10/12 mm Bullet Shape, 4/5/6/8/10/12 mm Cylinder Shape
  • Material: heads are made of aluminum oxide
  • Package Included 60Pcs（12 SIZE）: 4/5/6/8/10/12 mm Bullet Shape, 4/5/6/8/10/12 mm Cylinder Shape(5 Pcs each size)

22
33
99

Dog Nail Grinder

Multiple Usage: pet nail grinder for dogs

Wide Application

99

WARM TIP

1. When installing the grinding head, please make sure the chuck can hold 3mm shank. Meanwhile, you can use a special wrench to tighten properly and check whether it is firm and strong.

2. Wear protective equipment correctly during operation.Idling for 1-2 minutes after installation to make sure everything is normal.

3. During the grinding, the operator should stand on top of the workpiece to prevent it from flying, chipping and hurt.

4. Use the grinding head, the force should be increase slowly. If the force is too strong, the grinding head will get stuck and broken,even the machine motor will burn out. The grinding should maintain about 30° and move the grinding bits back and forth at a uniform speed.