NOTE:When the power is cut off, the data is reset.
Testing Data:
1.Active power value(W)
2.Voltage value(V)
3.Current value(mA)
4.Electricity time(D.H.M)
5.Active energy(Kwh)
6.Power factor
Specifications and Features
1.Operating voltage range:AC85-265V
2.Maximum detection current:≤10000mA
3.Frequency:50-60Hz
4.Power consumption:0.4W
5.Accuracy:1.0 level
6.Scope:Applicable to data detection of electrical equipment for three-pin AC plug input interface
Operation Mode:
1.Plug the power cord into the power monitor input and connect the power monitor output to the AC outlet of the device to be tested.
2.After toggle switch is pressed,the display shows the following data modes in turn.
3.If no key is pressed within 60 seconds,LCD screen backlight is off,but the data is still displayed.After the switch is pressed again,the backlight is re-lit.
4.The detector has the detection current limit of 10000mA,and if the current exceeds the limit,the detector backlight will flash;in this case,detection must be stopped immediately to avoid damage to internal components.