Caydo 10 Pieces 2.5 Inch Wooden Round Embroidery Hoops
How to use:
1.Loosen the outer screw, lay flat the inside hoop, put the cloth on the hoop, then put the outer hoop on the inside hoop.
2. Flat the cloth, make the warp and the welt both vertical and horizontal, ensure there are no pleats.
3. Tighten the screws.
4. Inspect the hoop whether it is tight enough. The way to check the tightness is to use a needle with thread going through the fabric surface. It is workable if there is a loudly sound when pulling the thread.