LTERIVER PCE-G2S4 is a PCI Express Gen 3 to SATA III (Serial ATA) 6Gbps controller. It will covert PCIE 3.0 X1 signal to 4-Ports SATA III on desktop PCs, Working Stations, MAC Pros and NAS. The PCIE 3.0 X1 interface will provide 8Gbps total bandwidth for 4X SATA III 6Gbps max speed ports. Allow users add 4X max SATA HDD/SSD on their system for AHCI Boot or Storage Expansions. This PCIE SATA III card will support Plug and Play on Windows OS, Linux kernels and MAC OS systems, now no need to install driver anymore for PCIE SATA expansion cards.
1. This PCE-G2S4 PCIE SATA card no need to install driver, if PCs or Servers can not find the added-on HDD/SSD and this device, then double check if the mother board PCIE slot is active and open. Some brand mother board may have defined PCIE function when it produced. User better call mother board manufacture locate the problem.
2. PCE-G2S4 was set on AHCI Boot Up mode. If users using the classical IDE mode, user’s PC will report BSD error. If users do not know which mode is running on PCs, follow steps as below: Windows Device Manage-IDE ATA/ATAPI Controllers- Will see “XXXX SATA AHCI controllers” or “XXX IDE controllers”. Make sure the system SSD/HDD in AHCI Mode.
3. PCE-G2S4 is designed on PCIE X1 interface, will works on PCIE X1, X2, X4, X8, X16 slot. Users better check if it has empty PCIE slot before purchase.
4. If user add the new or recovered HDD/SSD on the system, users must add this disk on system by Windows reminder in Windows Device Manager-Storage-Disk Management.
|
|
|
---|---|---|
8Gbps Bus Banwidth,SATA III 6Gbps
|
Heat Sink on ASMedia ASM1164
|
Standard and Slim Size PCs
|
|
|
|
---|---|---|
Windows OS,MAC OS X,Linux Kernel
|
PCI Express 3.0 X1 Interface
|
2.5in SSDs and 2.5/3.5in HDDs
|
LTERIVER PCE-G2S4 is a PCI Express Gen 3 to SATA III (Serial ATA) 6Gbps controller. It will covert PCIE 3.0 X1 signal to 4-Ports 6Gbps max SATA III on desktop PCs, Working Stations, MAC Pros and NAS. The PCIE 3.0 X1 interface will provide 8Gbps total bandwidth for 4X SATA III ports. Allow users add 4X max SATA HDD/SSD on the system for AHCI Boot Up or Storage Expansions. This PCIE SATA III card will support Plug and Play on Windows OS, Linux kernels and MAC OS systems, now no need to install driver anymore for PCIE SATA expansion cards.
WARNING:
1. This PCE-G2S4 PCIE SATA card no need to install driver, if PCs or Servers can not find the added-on HDD/SSD and this device, then double check if the mother board PCIE slot is active and open. Some brand mother board may have defined PCIE function when it produced. User better call mother board manufacture locate the problem.
2. PCE-G2S4 was set on AHCI Boot Up mode. If users using the classical IDE mode, user’s PC will report BSD error. If users do not know which mode is running on PCs, follow steps as below: Windows Device Manage-IDE ATA/ATAPI Controllers- Will see “XXXX SATA AHCI controllers” or “XXX IDE controllers”. Make sure the system SSD/HDD in AHCI Mode.
3. PCE-G2S4 is designed on PCIE X1 interface, will works on PCIE X1, X2, X4, X8, X16 slot. Normal users better check if it has empty PCIE slot before purchase.
4. If user add the new or recovered HDD/SSD on the system, users must add this disk on system by Windows reminder in Windows Device Manager-Storage-Disk Management.
Package: 1X PCE-G2S4, 1X User Manual, 1X Low Profile Bracket, 1X Mount Screw, 4X SATA Cable
PCE-G2S4 | PCE-G2S6 | PCE-G2S2 | |
---|---|---|---|
SATA III Ports | 4-Ports | 6-Ports | 2-Ports |
Boot Up Mode | AHCI | AHCI | AHCI |
Max Speed | 6Gbps | 6Gbps | 5Gbps |
HDD/SSD Type | SATA III Interface | SATA III Interface | SATA III Interface |
PCIE Standard | PCIE Gen 3 | PCIE Gen 3 | PCIE Gen 2 |
PCIE Interface | PCIE X1 | PCIE X4 | PCIE X1 |
Compatible PCs | Slim&Standard | Slim&Standard | Slim&Standard |
Compatible System | Windows,Linux & MAC OS | Windows,Linux & MAC OS | Windows,Linux & MAC OS |