Feature

●Constructed of Strong (3mm Thickness) Clear Plastic Acrylic
●Fits most scooters with 8mm mirrors.
●Height: 15” (Not including curve) | Mounts on mirrors up to 18” apart.
●Comes with mounting hardware.


Description

MMG MID-SIZE WINDSHIELD

  • Universal Mid-Size Adjustable Windshield
  • Constructed of strong 3 mm thick Clear Acrylic Material
  • Comes with mounting hardware.
  • Fits most scooters with 8 mm mirrors.
  • Mounts on mirrors up to 18 Inches apart. (Brackets may have to be angled to fit some trikes or scooters.)
  • Thickness: 3 mm
  • Dimensions:
    • Height: 15” (Not including curve)
    • Width: 17” (at base)

These windshields act to protect the rider from some or all the weather, may improve aerodynamics (reducing drag), and are an important styling element.

Made from transparent high-impact 3 mm acrylic plastic.

They may be shaped specifically to direct air flow over or around the head of the rider even if they are much shorter than the seated rider.

Installation guideInstallation guide

Step by Step:

11

22

33

To start the installation, secure your scooter on the center stand. Find threaded holes that secure the mirrors to the scooter. The brackets that secure the windshield arms will line up with these holes. You may need to remove the handlebar mirrors temporarily to secure the windshield brackets.

Install the windshield and mirror brackets by screwing them in with the provided bolts. Keep them loose initially so that you can adjust and align the brackets in position, tighten them later. Then slide the windshield arms into the brackets now attached to the headset. Use the remaining brackets and bolts with rubber cushions to attach the windshield. If done right, the windshield should fit over the top of the headset frame over the headlight.

Tighten everything down comfortably. Do not over-tighten the bolts hol- ding onto the windshield or you could crack the windshield plastic. Alternatively, dont over-tighten the bracket bolts into the headset or you could strip the head- set. The threads in the headset are aluminum which warps easily compared to steel metal bolts.

Product information