Feature
●【CLEAN-AND-SMOOTH CUTTING】► It heat up quickly, the tube will be reached 150℃ within 10 seconds. It cuts the styrofoam smooth and fast, seals the edges clean, and leaves no debris! You can cut the form board or foam block from any angle and craft into your desired shape.
●【STRONG-QUALITY & COMFORTABLE-GRIP】► The cutting pen/needle/rod is sturdy & very secure in the base, and memory foam cutter doesnt bend much even carving through large pieces of styrofoam. The handle is good thickness and non-slip, so you can get a full grip and wont get strain for large projects.
●【EASY TO USE】► Cuts and shapes quickly in any direction. The hot wires can bend to the shape you want, but only once otherwise it will break.
●【ON/OFF SWTICH】► Having on/off switch, very convenient to switch hot foam cutter on and off, so you dont have to keep unpluging it all the time! Carving fast, smooth and clean, without leaving debris. Recommended continuous use hot wire foam cutters time does not exceed 45 minutes.
●【APPLICATIONS】► Suitable for low density styrofoam, art model making, students handmade practise, advertising words making, creative model, creating party decorations, etc. Ideal foaming material carving tools.
Description
Electric Hot Knife Foam Cutter, Vickes Cutting Hot Pen Hot Wire Cutter 15W Electric Foam Cutting Machine Pen 10CM Styrofoam Cutter Heat Cutting Tool
Specifications:
Material: Stainless Steel
The Heater Tube Diameter: 2mm
Cutting Pen Weight: About 46g
Working Power: 15W
Input: AC 100-240V
Output: DC 6V/2.5A
Easy to Use
1. Draw shapes on the foam.
2. Plug in the power supply and turn on the power switch.
3.Start cutting.
4.Please turn off the cutting pen when you want to have a rest
5. After use, turn off the power and unplug the plug, and wait for the cutting pen to cool down naturally.
|
|
|
|
|---|---|---|
Detachable design |
Non-slip handle |
Easy-to-use switch |
Suitable for a variety of materials
Note:
1. The foam cutting pen, because of its special structure,can only cut low density foam, not suitable for the batch cutting or large density materials, cannot cut materials other than foam.
2. The transformer is not universal for diffferent lengths of foam cutting pens.
3. Heat pipe of cutting pen can not be repeated in a bending point. Bending repeatedly at one point may cause breakage.
4. After 30s heating, the foam cutting pen can be used to cut the foam from any starting pionts. Very easy to use, like writting by holding a pen.
5. Single cutting pen doesnt work more than 30 minutes at a time; 2-3 hours a day. For a short stay, you can turn off the cutting pen switch. For a longer stay, please disconnect the power transformer. It will extend the life of the cutting pen and transformer.
6. We do a power testing before delivery, so there will be slight traces of foam and slightly yellow on the pen. Please rest assured purchase.
