Feature

●This magnetic fence can be used on any bandsaw or drill press with a magnetic ferrous table. One will not work on saws with cast or plastic tables. It can be quickly and easily installed and removed from a bandsaw or drill press table by simply turning on/off the two magnet levers.
●One can be installed and used without installing an aftermarket bandsaw fence with guide rails and can be used on bandsaws where the blade slot exits to the front of saws that will not accept aftermarket fences. Using the T fence, the fence can be set to accommodate for blade drift
●Specifications: 18” long by 3” tall, so it will work with most 10” to 18” bandsaws. Multiple T slots on fence will accept numerous stops, auxiliary fences, and jigs. Slots will accept 1/4-20 hex head bolts or Taytools 1/4” or 5/16” T bolts.
●Adjustable T fence allows the fence angle to be set to compensate for blade drift
●Comes standard with two 150-pound breakaway strength 90-degree switchable magnets Fence to table angle is calibrated to 90 degrees out of the box and will never need to be adjusted and fence is milled straight. Magnets can be installed in one of four locations to accommodate for various bandsaw table sizes and additional magnets can be added (up to four) to increase holding power


Description

Taytools Magnetic Bandsaw Fence

Magnetic Bandsaw FenceMagnetic Bandsaw Fence

Advantages:

  • One can be used on any bandsaw with a magnetic ferrous table. Check to make sure a magnet has a strong attraction to your table before purchasing.
  • One can be installed and used without installing an aftermarket bandsaw fence with guide rails.
  • Using the T fence, the fence can be set to accommodate for blade drift.

What makes this Magnetic Bandsaw Fence Unique:

Magnetic Magswitch GripRight On and OffMagnetic Magswitch GripRight On and Off

4 Magswitches attached to bandsaw4 Magswitches attached to bandsaw

Magnetic Bandsaw Fence Stored On Machine FrameMagnetic Bandsaw Fence Stored On Machine Frame

Fence to table angle 90 degreesFence to table angle 90 degrees

Easily Install and Remove

Quickly and easily install and remove the fence from the bandsaw table by simply turning on/off the two magnet levers.

Four Magnet Locations

Magnets can be installed in one of four locations to accommodate for various bandsaw table sizes.

Convenient Storage

Conveniently store the fence on the machine frame when not in use.

90° Fence

Fence to angle is calibrated to 90 degrees out of the box and will never need to be adjusted.

T-Fence at three angles to adjust for driftT-Fence at three angles to adjust for drift

Adjustable T Fence

The adjustable T fence allows the fence angle to be set to compensate for blade drift.

Measurements of the Magnetic Bandsaw FenceMeasurements of the Magnetic Bandsaw Fence

Features:

  • It is 18" long by 3" tall and 3/4" thick, so will work with most 10" to 20" bandsaws.
  • Multiple T slots on fence will accept numerous stops, auxiliary fences and jigs. Slots will accept 1/4-20 hex head bolts or Taytools 1/4" or 5/16" T bolts.
  • Adjustable T fence allows the fence angle to be set to compensate for blade drift, and measures 1-1/2" by 4".
  • Comes standard with two 150 pound breakaway strength 90 degree switchable magnets.
  • Additional magnets can be added (up to four) to increase holding power.

Product information