Feature(may vary by option.)

●Power - 600 Watts Max x 2 @2-Ohms, 300 Watts Max x 2 @4-Ohms, 1200 Watts Max x 1 Bridged @4 Ohms
●Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
●Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
●Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
●Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
●Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
●Bridgeable - Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels

[Monoblock |  Class A  & B |  1500W]




[4-Channel |  Class A  & B |  1600W]




[Monoblock |  Class D |  3000W]




[2-Channel |  Class A  & B |  1200W]





Description

SSL Sound Storm Laboratories bannerSSL Sound Storm Laboratories banner
imageimage

imageimage
Amplifiers

2 Channel Car Amplifier - 1200 Watts, Full Range, Class A/B, 2/4 Ohm Stable, Mosfet Power Supply, Bridgeable

CG1202

Put your music into high gear and take off with the Sound Storm Laboratories CG1202 class A/B, 2 channel, full range amplifier. With 1200 watts max power and MOSFET power supply, this Amplifier is ideal for your entire audio system. It can power up your speakers, subwoofers or a combination of both. Customize the sound with variable low pass crossover, fixed high pass crossover and variable bass boost. Bridge the channels for more power and flexibility.

  • • MODEL 1200W High Output 2 Channel Amplifier
    Up to 450 W X 2 RMS @ 2 ohm
    Up to 225 W X 2 RMS @ 4 ohm
    Up to 900 W X 1 RMS Bridged @ 4 ohm
  • • Full Range, Class A/B, MOSFET Power Supply
  • • High and Low Level Inputs,
  • • Fixed High Pass Crossover, Variable Low Pass Crossover, Variable Bass Boost
  • • Include

Features

testtest

imageimage

imageimage

imageimage

Mosfet Power Supply

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Class A/B

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

Bridgeable

Combine the channels of a 2 or 4 channel amplifier to provide a dramatic increase in power output.

2 Ohm Stable

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

imageimage

imageimage

imageimage

imageimage

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Fixed High Pass Filter

Fixed high-pass filter gives you the ability to filter the frequencies that pass through to the full range speakers from a fixed frequency point.

Variable Bass Boost

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

High & Low Level Inputs

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.