![dent removal kit](https://images-na.ssl-images-amazon.com/images/G/01/x-locale/common/grey-pixel.gif)
HOW Car Dent Puller Kit WORKS
Gold Dent Puller Lifter
1. Prepare pdr kit: Puller dent removal kit, use a cleaning agent and cloth to clean the dent area, making its surface clean and dust-free.
2. Insert the glue stick into the glue gun, then heat it for about 2-5 minutes until the glue spill out from the glue gun.
3. Choose an appropriate small dent puller tab in pdr tools and apply hot melt glue to it. 18 car dent remover tabs in dent removal tool can be used.
4. Put the dent remover tab on the car dent,hail dent,door dent,etc, hold on and wait for a minute until the hot melt glue is a clod.
5. Use the dent repair puller lifter and adjust its height and width to make the dent repair.
6. Spray 75% rubbing alcohol all over the residual glue, wait for 1-3 minutes. Peel it off or remove it with a plastic shovel in dent removal tool.
Dent puller suction cup(dent popper) to pop a dent
Prepare car dent repair kit: dent puller suction cup, cleaning cloths, cleaning agents, water, hair dryers,etc. Clean the dent area, Use a cleaning agent and cloth to clean the dent area, making its surface clean and dust-free. Place the dent popper on the dent surface and press down firmly, press down and close the air pressure switch to extract vacuum, hold the handle tightly and pull it outward with force,dent repaired.
Dent hammer and repair pen in car body repair kit
The repair pen needs to be used in conjunction with a dent hammer. Some car body dent may have raised parts around them, and it is necessary to use the repair pen to flatten the raised parts.