Feature

●Professional design - Using the principle of leverage to design the dent puller is ergonomic, the dent bridge puller with a unique arched bridge can adjust the spacing and rotate the button to better fit the dents, the efficient and labor.
●Paintless repair - The T-bar dent puller is made of tempered high-carbon stainless steel and standard stainless steel. in the parts of the body contact with high-quality rubber precision package, can avoid damage to the original paint, even the rubber hammer suitable for uneven dents has a good rubber package.
●Widely used - Suitable for any auto dents, repair door dings and hail damage and other dents. Efficient action on automobile, refrigerator, washing machine and other metal surface dents.
●DIY - Tools coming with detailed repair steps introduction for operate, it makes the dent removal process so easy. Instead of spending hundreds of money in 4s shops, our dent puller tool kit can help you repair your cars by yourself for many times, so it can save a lot of money and time for you.
●Customer Service - Please read the product description and manual carefully before use. Contact us through Amazon for any questions, We will help you solve your issues. (Note: Please do not trust any third-party information to avoid being deceived, We only service through Amazon.)


Description

Professional auto dent repair tools do the job for you.
Save cash and enjoy your time while you witness these tabs recover your cars dents like its never been damaged before.

Please dont worry about how to use this kit even if you never handle it before. Our package coming with detailed repair steps introduction for operate, it makes the dent removal process easily.

Packing list
1×Pro slide hammer T-bar dent puller
1×Rubber hammer
5 x Yellow glue stick
5 x Black glue stick
20W Glue gun
16×Black glue puller tabs
5×Blue glue puller tabs
1×Metal tap down pen
8×Tap down head
2×Glue shovel
1×Empty alcohol bottle
1×Black Clean Cloth
1 x Instructions

Easy to use :(Suit for dent&ding and home DIY repair)
Step 1.Clean dent surface.
Step 2.Put the glue sticks to gun and heat, connect the power source and preheat for 5-10 minutes.
Step 3.According to the dent size to choose the Glue Puller Tab, then put the heated glue on puller tab, immediately place puller tab in the center of the dent and hold on until it sticks.
Step 4.Let the glue cool for about 5-8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter.
Step 5.After the glue cooling,use a golden dent lifter or bridge puller to align and press the puller to pull up the dent. Repeat the above steps until the dent disappear.
Step 6.After finishing the dent,use the alcohol to clean the glue which on the car and the puller tabs.

Note: For detailed operation and more tools, please refer to the instruction manual.