Feature(may vary by option.)

●【128PCS Dent Puller Kit】This dent pulling kit comes with black dent lifter, bridge, t-bar puller,suction cup, rubber hammer,leveling hammer, led reflector board, glue gun & sticks, pulling tabs, tap down pen, screwdriver, window wedge, air wedge, scraper.
●【Durable】Our dent removal kit is constructed with alloy+ plastic material, durable and rust-resistant, to ensure its long-term usage. The black dent lifter and bridge pullers have rubberized bottoms that wont damage original paint.
●【Efficient Dent Removal】The black dent lifter is a powerful tool that uses leverage to pull out dents from the metal surface without damaging the paint or the car’s body. The bridge dent puller is ideal for small and shallow dents as it has glue tabs that adhere to the surface and pull the dent out. The t-bar dent puller is great for deep and large dents and provides a strong grip for pulling.
●【Widely Applicable】With its ergonomic design and no-hassle installation, the paintless dent repair kit is perfect for DIY enthusiasts and professionals alike. This car dent puller can be used on all types of vehicles, including cars, suvs and motorcycles.Its also perfect for various surfaces, including metal, plastic.
●【Cost-Effective】We recommend that you read the instructions we provide before using. With this car dent repair kit, you dont have to spend hundreds of dollars on car shop repair services. This dent removal kit offers professional-grade results at a reasonable price.

[blue]




[black]





Description

CC
nn

How to Use Black Dent Lifter&Bridge Dent Puller?

  1. Clear the surface with a wet cloth.
  2. Insert the glue stick into the glue gun, heat for about 3-6 minutes and apply the glue.
  3. After the glue has cooled for 1-2 minutes, use the black dent lifter and adjust its height to repair dents.
  4. Afterwards, use the bridge dent puller to align, then tighten the knob slowly with proper power until the surface of the dent is flatted or sightly bulged (Repeat the above steps until the dent pop up)
  5. Spray with 95% alcohol and remove with a plastic shovel.

mm

How to Use T-Bar Dent Puller?

  1. Clear the surface with a wet cloth.
  2. Insert the glue stick into the glue gun, heat for about 3-6 minutes and apply the glue.
  3. Wait for 2-3 minutes, when the glue cools down and has residual temperature, use the spring force to pull the t- bar puller back
  4. Repeat the above steps until the dent pop up
  5. Spray 95% alcohol on remaining glue and scrape it off with a shovel after 1-2 minutes.

KK

How to determine whether the glue stick is sufficiently heated？

1. The glue is relatively transparent and flowing

2. The glue drips from the glue gun

3. The glue comes out when you press the button of the glue gun

Why is the glue easy to fall off?

1. Fully heat for 3-6 minutes

2. Spread the glue evenly on the glue tab

3. Press lightly for 2-3 seconds when sticking the glue tab

4. Wait until the glue cools down quickly and there is still a residual temperature before pulling

When is the glue the most viscous?

Glue works best in a foamy or fully liquid state

Can the dent be completely removed?

No, It can only be repaired to the greatest extent (the repair effect is related to the position of the dent, the thickness of the car iron sheet, ect)

How to quickly clean up the remaining glue?

Spray 95% alcohol on the edge of the glue, wait for 1-2 minutes, then gently scoop it off with a plastic shovel

ROADGIVE Various Styles of Paintless Dent Puller Tool

b

Dent Removal Kit

l

Dent Puller Kit

t

Dent Removal Tool

i

Dent Repair Kit

r

Dent Puller Tool

K

Dent Repair Tool

Quantity
128PCS 75PCS 97PCS 100PCS 100PCS 128PCS
Glue Stick
15 10 10 10 10 15
Glue Tab
70 46 64 64 64 70
T-Bar Puller
1 0 1 1 1 1
Dent Lifter
Black Golden Golden Golden Black Golden
Bridge Dent Puller
1 1 1 1 1 1
Suction Cup
3 2 3 3 3 3

Product information