Feature(may vary by option.)
●Car door edge guards,waterproof flexible, easily cut and into place the car door edge,usually you can just press the strip firmly into place and then push it in firmly to make sure It fits and is smooth along the door edge,made much nicer visually.
●When the door is opened in a narrow place,putting a ding or scratch in your door or body panel,car door edge guards,It can protect the door edge from damage.
●These are easy to install (less than 10 minutes per door even if you are very careful)，gently tap it with a rubber hammer (not included), and slowly clip it into the edge of the door. It can also be installed in the place with radian, and the small card at the end should be taken out.
●One tip is that after you cut the strip to length, there may be a small amount of little metal pieces showing -- if so, pull it out it (it is only about 1/16 wide so it is easy to remove), but make sure that this does not end up on your driveway or garage floor.
●Car door edge protection device, multi-purpose installation, applicable to doors, tailgate, hood, etc., pay attention to measuring the door thickness before purchasing and installing.(dimensions as shown in the figure).
●If you have any questions about the installation, you can contact us at any time, and we will reply you as soon as possible!
[Red 32FT(10m)]
[Red 16.4FT(5m)]
[Black 16.4FT(5m)]
[Black 32FT(10m)]
[Blue 16.4FT(5m)]
[White 32FT(10m)]
[White 16.4FT(5m)]
Description
|
|
|
|
|---|---|---|
Material:Rubber materials . resistant to high temperaturen bad weather, not easy to deform, Corrosion resistant. No glue car door edge guards red,U shape trim helps fit tightly. |
Easy to install:Build in metal clips,firmly attached on door edges. Metal clips were built inside soft rubber. They help fit tightly and wont damage your door paint. |
Installation steps:1.Clear exposed steel sheet. 2.Install the sealingt strip along the door or obiect edges,Fix the rubber of the entire door. 3.Tap with a installation tools to make the sealint strip close to the door or object edges. Note:Paeace remove the stainless steel on both sides of the product before installastion to avoid scratches and oxideation. |
|
|
|
|
|---|---|---|
Installed:Installed on Front Doors, fits very snug, soft yet sturdy, have a firm grip on the door, say goodby to frequent replacement. |
Application:Avoid scratching on other cars. |
Suitable for most car models:Could be installed on front doors, back doors, back hatch door, bonnet edge. |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| LY8 Car Door Edge Guards No Glue White | LY8 Car Door Edge Guards No Glue Red | LY8 Car Door Edge Guards No Glue Black | LY8 Car Door Edge Guards No Glue Black | LY8 Car Door Edge Guards No Glue Blue | LY8 Car Door Edge Guards No Glue Blue | |
| Length | (10m)32ft | (5m)16.4ft | (5m)16.4ft | (10m)32ft | (5m)16.4ft | (10m)32ft |
| Color | White | Red | Black | Black | Blue | Blue |