Feature
●The Punch PS-8 is a self-contained amplified subwoofer system featuring a single Punch 8" shallow subwoofer in a custom sealed enclosure and a built-in 150 Watt Class D amplifier
●The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving
●Featuring adjustable 12db/Octave low pass crossover, built-in adjustable bass boost EQ, hi-level/low-level inputs and built-in 0°/180° phase switch
●Includes Remote bass level control, all power, ground, turn-on wires and mounting hardware with dimensions of 14.4” x 9.4” x 3.3”
●Famous Rockford Fosgate build quality with a full 1-year warranty
Description
Amplified Loaded Enclosure for Tight Spaces
PS-8
If you need to quickly add bass to a system but dont have much space or height to make it happen? Then the PS-8 is a perfect candidate! The PS-8 features a Punch 8” subwoofer in a custom sealed enclosure and is powered by a mighty 150-Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk, cargo area, or under the seat.
Tight Space? No Problem for the Rockford Fosgate PS-8
Producing high output power while minimizing the impact on the vehicles charging and electrical system. Measuring at 14.4” x 9.4” x 3.3”, the PS-8 chassis is designed to maximize mounting applications where space is tight.
Includes Everything You Need to Get Started
For even more control over your bass, we include a remote Punch level control with the amplified loaded enclosure. Simply plug it into the amplifier panel and route the cable to your desired mounting position. Also included is a complete wiring kit for an easy integration into your aftermarket or OEM audio system.
- Audio Input: The RCA/Speaker Harness utilizes either speaker level (high-level) or RCA (low-level) inputs.
- Power Connector: The power connector allows for quick connection and disconnection of the amplifier’s Remote, power and ground source. The power and ground are set-screw wire connectors and will accommodate 4 AWG. The remote is a set-screw wire connector and will accommodate 8 AWG.
- Input Level: Set the Input Level switch to match the outputs of your source unit. (LO - RCA or HI - Speaker Level)
- Remote Punch Level Control: When connected, the “Level Control” is linked and allows you to remotely control the output level of the amplifier from the dash or center console.
- Input Level Control: The input level control is used to match the output of the audio source.
- Variable Crossover: Is a built-in 12dB/octave Butterworth filter with a crossover point variable from 50Hz to 120Hz.
- Punch EQ: This is an adjustable Bass control adjustment variable from 0dB to +12dB @ 45Hz.
- Auto Turn On: Three different automatic turn-on modes can be selected; REM(+12V), DC Offset and Audio.
- Phase Switch: Allows you to select the output phase of the amplifier between 0° and 180°.
- Power/Protect LED: Power LED illuminates green when the unit is turned on. Protect LED illuminates red if a short circuit or too low of an impedance is detected at the speaker connections. The amplifier will automatically shut down if this occurs.
