Feature
●This acrylic hook knife tool is specially used to cut acrylic sheets or other plastic sheets.Acrylic sheets or other plastic sheets are hard and brittle, so it is difficult to divide. This hook knife can help you carve a thin groove on the acrylic sheet, and then you can break the acrylic sheet along the groove.
●1.Please mark the board with a pen,then use a ruler to place it according to the mark.2.Use the hook knife to draw a groove on the acrylic plate along the ruler,and the ruler must be pressed with your left hand. Hold the hook knife with right hand and repeat the operation to make the groove deep enough.
●1.There is a ridge-like protrusion on the back of the hook knife. Place the hook knife under the acrylic board, align the protrusion of the hook knife with the groove just hooked out,and press down on both sides of the groove with both hands,Let a small part of the acrylic board split along the groove.2.Completely break the acrylic board along the groove.
●When using the hook knife,pay attention to protect the tip of the knife and do not touch the ground. If the tip of the knife is not sharp, you can change the blade.Contains a hook knife with 1 blades and a box of blades. There are 11 blades in total.
●Contains a hook knife with 1 blades and a box of blades. There are 11 blades in total.
Description
Correct Use of Acrylic Cutting Knife
When cutting acrylic, use the lower tip of the blade to Scoring the acrylic, not the entire edge of the blade, and prepare a ruler that is thick, wide, and long enough.
