• Table tennis robot model: Suz S201
• Rated voltage: 100V-240V
• Rated power: 50W
• Ball frequency: serving 35-80 balls per minute
• Ball speed: 4-40 m/s
• Spin pattern: no spin, topspin, backspin, and side spin
• Ball trajectory: fixed or random
Special attention
• Suz S201 is designed to work properly when at least 20 balls are available below the feeding tube. If the machine does not serve properly or stop working, make sure that there are enough balls around the feeding tube and the ball frequency on the control box is at least 1. Make sure enough balls around the feeding tube,Tighten the net a little, let the tilt rise a little, so the balls will came to the feeding tude.
• Adjust robot head up and down, you can play direct serve or indirect serve. how to adjust robot head up and down can send us message for video. If you would like to play direct serve (i.e., the served ball bounces one time on the table before you hit the ball), set topspin to 6 and backspin to 2 or 3 on the control box. If you would like to play indirect serve (i.e., the served ball bounces two times on the table before you hit the ball), set topspin to 4 and backspin to 3 on the control box.
• Adult supervision is required for children to use Suz S201. A child might be hit by balls and get hurt if the ball frequency is accidentally set too high.
• Read the manual for instructions on how to install the robot.How to install power cord, put in power cord behind the control box.(not the back of the machine,put in power cord behind the control box )
• If you need any help, please email the manufacturer. The manufacturers email address can be found in the manual. The manufacturer will provide free replacement parts for any damage caused by normal wear and tear within one year from the purchase of Suz table tennis robots.
• Can only be placed on table tennis tables less than 2.5 inches thick. if table tennis table is more than 2.5 inches thick is not suitable for our robot.
the bracket to hold the controller only fit less than 2.5 inches thick table.
|
|
|
|
---|---|---|---|
Table tennis robot+200 balls40MM or 40 MM + balls all ok. |
Come with ball recycling netS201 ping pong ball machine come with ball recycling net collection system. There is no need to pick up the ball when you start to do solo training , because it collects balls automaticlly. |
Table tennis robotUnpack the robot If you don’t use the robot for a long time, please clean it up and put robot in box or bag to avoid collecting dust. |
Collects balls automaticllyThe gear motor doesnt work any more after 30mins working If the machine does not serve properly, make sure that there are enough balls around the feeding tube and the ball frequency on the control box is at least 1. |
|
|
|
|
---|---|---|---|
Adjustable Jump Ball and the elevation of robot headAdjust robot head up and down, you can play direct serve or indirect serve . how to adjust robot head up and down can send us message for video. If you would like to play direct serve (i.e., the served ball bounces one time on the table before you hit the ball), set topspin to 6 and backspin to 2 or 3 on the control box. If you would like to play indirect serve (i.e., the served ball bounces two times on the table before you hit the ball), set topspin to 4 and backspin to 3 on the control box. |
Robot can serve 9 kinds of spin ballGreat in setting spins and landing spots, It is able to serve topspin, backspin, left-spin, right-spin, mixed spin, 9 Kinds of spinning balls with different frequency and speeds |
Ball grooveWhen the balls is dirty , remove cover and clean groove |
New Control BoxHow to install power cord, put in power cord behind the control box.(not the back of the machine,put in power cord behind the control box ) This controller adds new features: One key topspin One key backspin Direct service Irregular service |
|
|
|
|
---|---|---|---|
Package ListPackage List: table tennis robot+200 balls Random color (orange or white) Ping pong robot with recycling net New Control box Power supply Serving wheel User manual |
Point out the ball presentationAnalog controls for ball speed, frequency and oscillation, strong & weak balls, high & low balls,easy adjust the position, it allows you to focus on training and have fun with your teams, family and friends |
make sure enough balls around the feeding tube.The ramp for the balls also doesnt provide a decline well enough for the balls to fall to the middle of the feeder, how to do ? Tighten the net a little, let the tilt rise a little, so the balls will came to the feeding tude. make sure enough balls around the feeding tube and the ball frequency on the control box is at least 1. |
Suz RobotSuz Robot |
1.Read the manual for instructions on how to install the robot.How to install power cord, put in power cord behind the control box.(not the back of the machine,put in power cord behind the control box )
2. Adjust robot head up and down, you can play direct serve or indirect serve. how to adjust robot head up and down can send us message for video. If you would like to play direct serve (i.e., the served ball bounces one time on the table before you hit the ball), set topspin to 6 and backspin to 2 or 3 on the control box. If you would like to play indirect serve (i.e., the served ball bounces two times on the table before you hit the ball), set topspin to 4 and backspin to 3 on the control box.
3.Make sure there are 20-200 balls in the tube and the ball frequency on control box is at least 1.
4.Play with your friends and familys with our robot.
If the pictures,color,and the description of function are different from the actual product, everything should be subject to the actual product
Our company reserves the right of final interpre
![]() |
![]() |
![]() |
|
---|---|---|---|
S101 | S102 | S201 | |
Customer Reviews |
4.2 out of 5 stars
91
|
4.0 out of 5 stars
91
|
4.3 out of 5 stars
171
|
Price | $179.99$179.99 | $189.99$189.99 | $369.99$369.99 |
Assemble location | Clip on table / Place on table | Clip on table / Place on table | Clip on table |
With net Recycle balls | No | No | Yes |
Unload balls automatically | No | No | Yes |
Remote control | Wired remote control Knob adjustment | Wireless remote control Digital display | Wired remote control Digital display |
Serve loop | adjustable angle from 0 to 40 degree (Hand adjustment) | adjustable angle from 0 to 40 degree (Hand adjustment) | adjustable angle from 0 to 40 degree (Hand adjustment) |
Side spin | Robot head can be left and right adjusted between 180 degree | Robot head can be left and right adjusted between 180 degree | Robot head can be left and right adjusted between 180 degree |
Ball spin | 9 different spins | 9 different spins | 9 different spins |
Onekey topspin/backspin/Onekey Direct service/ Irregular | No | Yes | Yes |
Irregular random landing spot | No | No | Yes |
Long /short ball | No | No | No |