G.Weight | 21.60 lb / 9.8 kg |
N.Weight | 16.53 lb / 7.5 kg |
Packing Dimensions | 34.64*15.74*16.14 in / 88*40*41 cm |
Rated Voltage | 100-240V |
Rated Power | 50W |
Spin | Topspin, Underspin, Non-spin, Left and Right Side Spin |
Serving Frequency | 35~80 Balls/Min |
Serving Speed | 4~40 m/s |
The Most Balls | 300 Balls |
The Fewest Balls | 20 Balls |
Point of Fail | Random |
|
|
|
|
---|---|---|---|
Step 1Remove the machine from the box and place on the table top of the ping-pong table |
Step 2Expand the net and ball recovery slots |
Step 3Remove the support rods on both sides and install them |
Step 4Prop up the net |
|
|
|
|
---|---|---|---|
Step 5Secure the machine to the edge of the table |
Step 6Install the bracket of the side net and secure the side net |
Step 7Install the control panel on the left or right |
Step 8The effect of the complete installation |
By adjusting the wheel speed and the tilt of the machine head, the machine can send 42 kinds of spinning balls and 1 kind of non-spinning balls.
Position 1: The fast speed of the upper wheel is the top spin, the fast speed of the lower wheel is the bottom spin, and the same speed is the non-spin.
Position 2: The fast speed of the upper wheel is left spin, the fast speed of the lower wheel is right spin, and the same speed is non-spin.
Position 3: The fast speed of the upper wheel is right spin, the fast speed of the lower wheel is left spin, and the same speed is non-spin.
The positions between 1-2 and 1-3 can be combined into various rotating balls with the rotation speed of the two wheels.
Serving method: the machine’s serving method is divided into direct and indirect
Indirect serve: With appropriate ball speed and selection, you can contact various receiving and serving techniques, suitable for beginners.
Direct serve: Compared with indirect serve, the strength and rotation of direct serve are stronger. By adjusting the angle of the machines head, the server can make a curved ball, smash and high ball, which is suitable for regular training.
3-4: Full table swing________________________3-5: 3/4 of the table swing on the left
2-4: 3/4 of the table swing on the right_______1-4: The right half of the table swings
3-6: The left half of the table swings__________2-5: The middle half of the table swings
1-5: A quarter of the table top swings to the right in the middle
2-6: A quarter of the table top swings to the left in the middle__________1-6: no swing
A. Start/Pause button__________________B. Digital display
C. Swing head frequency key____________D. Ball frequency key
E. Upspin speed key____________________F. Downspin speed key
G. One-key unloading function__________H. Power connection hole
I. Table fixing clip
Roation Range
Serve Method
Swing Range
Control Penal
Swing Rods
![]() |
![]() |
![]() |
|
---|---|---|---|
WBTT-HP07 | WBTT-BCN | WBTT-S6PRO | |
Assemble Location | Clip on Table / Place on Table | Clip on Table | |
Recycle Net | No | Yes | Yes |
Reload/Unload Balls Automatically | No | Yes | |
Control Method | Wired Control Panel & Knob Adjustment | Wired Control Panel & Digital Display | |
Serve Type | Adjustable Angle From 0 To 40 Degree (Hand Adjustment) | Adjustable Angle From 0 To 40 Degree (Hand Adjustment) | |
Side Spin | Robot Head Can Be Left And Right Adjusted Between 180° | Robot Head Can Be Left And Right Adjusted Between 180° | |
Ball Spin | 9 Different Spins | 9 Different Spins | |
Onekey Topspin/Backspin/Onekey Direct Service/ Irregular | No | Yes | |
Irregular random Landing Spot | No | Yes |