Feature(may vary by option.)
●【Universal Compatibility:】8mm mounting bolt, the turn signals fit for most DC 12V motorcycles motorbike scooter quad cruiser off road atv and dirt bike. Compatible with BMW Honda Kawasaki Suzuki Triumph Yamaha
●【Super Bright:】Built in 3pcs high power led chips per turn signal light that emit high-intensity lighting output. much brighter than halogen bulbs. Greatly improve the visibility on the front side and ground when driving at night. Moreover, your signaling indicators will more easily been noticed by oncoming traffic to increase safety. The better and safer it is for us and other motorists
●【Easy Instllation】Two installation methods. If your original blinkers mounting bolt is 8mm, just remove your stock turn signals and install the new light on where the old one was removed. Or drill an 8mm hole on where you to mount the new turn signal lights to DIY your motorcycle to make you bike street legal
●【IP67 Waterproof】Made from high quality PC lens and ABS housing, sealed well on the edge, water tight and dustproof, stay illuminated in extremely hot, cold, rainy or snowy days. Ideal replacement for your old dull blinkers. Give your motorcycle a sleek look
●【Paskage Including】4 Pcs front rear motorcycle led turn signal light amber blinkers, worry-free 365 days manufacture warranty, and friendly customer service
[smoked & amber]
[amber & white + amber & red]
[amber]
[Sequential Amber]
Description
Fitment:
Universal fit for 8MM hole, theyll work with most popular motorcycles such as sport bikes / street bike /off road / chopper / cruiser / quad / dirt bike
Two Installation Methods:
First One: If the diameter of your original turn signal light mounting bolts is 8mm, just take off the tock light and install the new light
Second one: Install the new light on anywhere you want to mount. What you need to do is to drill 8mm hole and then mount the new turn signal on the hole
Specification:
Lens Color: smoked
LED Lights Color: Amber
Voltage: DC 12V
Cable Length: 28cm/11inch
Material: Plastic + Metal
Position: front / rear
Package Including:
4 x Amber Motorcycle Turn Signals
Feature:
Water sealed, IP67 waterproof
Easy installation, bolt mounting
Connection: black wire - negative; yellow - turn signals
Notification
1. If the lights stay solid, dont blink, you may need replace your factory flasher relays with led relay
2. If the lights get hyper flash, recommend using a resistor to solve the issues
- Diameter of Mouting Bolt: approx. 8mm / 0.31inch
- Thread Length: approx. 2.2cm / 0.72inch
|
|
|
|
|---|---|---|
Waterproofwell-sealed on the edge, effectively keep water out of housing, stay illuminated in rainy days |
Universal Compatibilitythe turn signal lights with 8mm mounting bolts can be used on most motorcycle Thread Length: approx. 2.2cm / 0.72inch |
Easy Installation1. if your original blinker is with 8mm mounting bolts, just remove your stock turn signal and install the new light on where the old one was removed. 2. drill an 8mm hole on where you to mount the new turn signals to DIY your motorcycle |
|
|
|
|
|---|---|---|
High Quality Smoked Lensmade of high quality pc lens and ABS housing durable and anti-scratch |
28cm/11inch Wire Lengththe wire is long enough to run it to your turn signal harness |
2 Wire Connectionblack wire to negative yellow wire to negative |
