The model RS-4, looks like a power strip, but it is really a state of art, power management system, multimode power sequencer with EMI/RFI noise filtering and power conditioning, and is a UL 1449-3 listed 1935 Joeles surge protector with a 15 ft. power cord and much more. Previously, pro audio power sequencers were rack mounted and limited to large professional audio performances. Designed by musicians and roadie tested, the RS-4 is transportable and can be used anywhere—onstage, in the studio, or in the home. Use the RS-4 with all your gear, guitar, bass, keyboards, and P.A.
The RS-4 is manufactured in Duluth, Georgia U.S.A..
Thanks for visiting our Rockn Stompn factory store here on Amazon
The RS-4s power sequencer spreads the initial inrush current of your gear over four steps allowing you to power up far more gear, more safely than ever before. Consolidating all your gear and or your band"s gear into a single RS-4 will lower noise and reduce exposure to ground loops.
The golden rule is to "Always turn your main amp on last, and turn it off first" to avoid the potentially destructive loud "POP." The RS-4 simply does this automatically, powering all your equipment up or down in the proper sequence, every time. You can independently adjust on and off delay sequence from 1-15 seconds and choose one of four power sequencer modes of operation. Standard Mode, Instant On Mode, Receptacle One Always On Mode, Timer Mode.
|
|
|
---|---|---|
Instant OnWhen AC power is applied to the RS-4, the unit will immediately begin the On Delay Sequence. This is useful in a stage or studio environment where the RS-4 may not be the main power switch but you still want the instant on convenience of a conventional power strip but with the added advantages of the power sequencer. |
Receptacle One Always OnIn this mode, receptacle one will always be on while the On/Off Delay Sequence for the three remaining receptacles can be set from 1-15 seconds and engaged with the footswitch. This mode is useful to keep any piece of gear on continously, like a computer or a light. |
Timer ModeThe unit will automatically shut off power sequentially after a designated number of hours, determined by the on and off delay setting. This mode works well in the studio to autmoatically power down gear at the end of the day or when you forget. |
The RS-4 has been tested and conforms to current UL 1449 4th Edition safety standard for surge protectors. To insure the highest quality the RS-4 uses only Littelfuse components in its surge protective circuit design. Without a doubt Littlefuse is the world leading manufacturer of electronic circuit protective components and provides the RS-4 with a solid 1935 joules of real surge protection. Each RS-4 is manufactured / assembled / handbuilt in Duluth, Georgia U.S.A.
Thanks for visiting our Rockn Stompn factory store here on Amazon