●BOBBIN WINDERS FOR SEWING MACHINES : high speed, this bobbin winder machine saves a lot of time when you need to get a big project completed quickly. ●BOBBIN WINDER MACHINE : runs on AC power 110 V, start/stop button and light indicators makes it easy to operate, automatically turns off when bobbin is full. ●AUTOMATIC WINDER : automatic bobbin winder for domestic and industrial sewing machines bobbin, durable and practical, save a lot of manpower and convenient for your sewing work. ●WINDING MACHINE: easy to install and maintain, automatic bobbin winder with screws and the spool thread stand and base plate can be table mounted , or you can put the portable automatic electric bobbin winder anywhere you need it. ●BOBINS FOR SEWING MACHINE : fits for all bobbins including Type M, Type L, Type 15 (Universal) or any bobbin with 1/4 inch (0.64 cm) center hole. Most of the bobbins will fit the Default position. If your bobbin doesnt fit or the bobbin winder not evenly on to bobbin during use, please try adjust the position of the sensors. The adjust step as follow: turn the screw on the sensor plate to adjust, the edge of the bobbin should be in line with the middle point of the sensors.
Description
Package Included:
Screw X 2
Base plate X 1
Metal screw X 2
Thread stand X 1
Thread spool shaft X 1
Bobbin winder machine X 1
Product Usage Guide X 1
Bobbin Winder
Easy to operate
Convenient for sewing work
Auto stop when bobbin thread is full
Fits for most of bobbins including Type M, Type L,
Type 15 (Universal) or any bobbin with 1/4 inch (0.64 cm) center hole
short thread spooland 2 black sensors
Put your empty bobbin in short thread spool; most of the bobbins will fit the Default position. If your bobbin doesnt fit or the bobbin winder suddenly stopped during use, please try adjust the position of the sensors. The adjust step as follow: turn the screw on the sensor plate to adjust, the edge of the bobbin should be in line with the middle point of the sensors.
Tension disks
There is a tension knob on the tension disks, If bobbins are winding unevenly or you want to adjust the thread tension, The adjust step as follow: turn the tension knob right or left to adjust the thread tension.
Thread cutter, "START" and "STOP" button
After installation, start winding by simply press the "START" button, press the "STOP" button to stop winding; press the start button again to continue the winding process. the automatic bobbin winder will stop on its own once the thread is full, then you need pull out bobbin and cut the thread by using the thread cutter on the machine.
Step 1:
First step, nstall and tighten two fixing screws between the bobbin winder and the base plate with the help of a screw driver, and also make sure you dont install the bobbin winder backwards.
Step 2:
Second step, install the thread stand and the spool stud onto the two holes of the base plate, then tighten nuts on them downwards; make sure the shorter spool studs is horizontal with the tension disc and the taller thread stand is inline with the "start" and "stop" buttons .
Step 3:
Third step, put your thread cone on the spool stud and the thread first through thread guide rod, down and into small hole on the side of tension disks. Guide thread clockwise between tension disks and wrap clockwise twice before inserting thread end into hole in bobbin.
Step 4:
Fourth step, put your empty bobbin in short spool, clockwise wind the thread around 3 - 4 circle along the bobbin to fix. Install finish, start winding by simply press the "START" button, press the "STOP" button to stop winding; the automatic bobbin winder will stop on its own once the thread is full; then pull out your bobbin and cut the thread by using the thread cutter on the machine.