Feature(may vary by option.)
●[Safty Guarantee]:CE 1019 EN 341 ensures its security. Climbing Descender you can trust.Weight limited:330 lb(150kg),Breaking Strength: 1.47kN .Suitable for 0.35-0.47(9-12mm)inch dia. Ropes.
●[High Quality]:Stop descender made of hot forged aluminum-magnesium alloy, which has the characteristics of high strength, light weight and convenient carrying.
●[Easy to Install]:Device can be rapidly installed or removed from the rope without disconnecting it from the harness, stop wheel of the lowering device is integrated with the lower handle, and slides downward through the rope to drive the steering wheel to turn through the connecting rod to open and close the shaft.
●[Functional]:Design makes it good for descending tight passages,suitable for teach use. Self-breaking function allows you to easily stop and hold your position on rope. Stop wheel is connected to the lower handle and the stop wheel through the connecting rod. The handle strength can control the descending speed.
●[Widely Application]: For rock climbing, mountaineering, exploring, rappelling, rescue, engineering protection, aerial work etc.Provides great protection for users, especially to beginners.
[red]
[Blue]
[Black]
Description
CE Certification
CE 1019 & EN 341
CE marking is a certification mark that indicates conformity with safety, health, and environmental protection standards for products sold within the European Economic Area (EEA).
NewDoar Climbing Descender
9-12 mm Stop Descender
- When descending, while pressed lightly of the release, you can descend at a controllable pace.
- As a safety measure.It can protect you from an accidental fall.add a short prusik loop tied on the slag side of the rope onto a carabiner attached to you right side hook of the saddle or climbing harness. So when descending, if inadvertently pressed too hard on the release, the rope stopped by the prusik and the fall is arrested even before the Stop Descender engaged.
- Material: Aluminum magnesium alloy
- Size (L x W): Approx. 23*5.5cm/ 9.06 * 2.17 inch
- Weight: 370g/0.816lb
- Max Load:150 kg/330 lb
- Suitable for:9-12mm/0.35-0.47 inch dia. Ropes
- Color: Red, Blue, Black
Features about NewDoar Stop Descender
|
|
|
|
|---|---|---|
Friction Wheel and Stop AxleWith groove for dissipation and reduce the damage of the rope. The stop axle connected with the handle by hand grip strength to control the fall velocity. . |
Handle and safety switchThe handle is designed for smoothly control of descender and stop. The safety switch can be connected to other equipment like carabiner . |
Brake wheelBrake fix an automatic spring, vein surface increase friction. With small grain improves the friction for safe descending. . |
How to Use
|
|
|
|
|
|---|---|---|---|
|
1. Turn the upper plate and put the rope. Place the rope on the right side. |
2. Run the rope through the swivel, then run the rope through the friction wheel |
3. Combine the plates and connect to the carabiner, dont forget to connect the safety swith to the carabiner. |
4. The descent speed can be adjusted by the handle, the light is to slow down, let go and hold tight to halt. |
|
|
|
|
|
|
|---|---|---|---|---|---|
| NewDoar 8 Descender | NewDoar 8 Descender with Bent-Ear | NewDoar 24kN Carabiner | NewDoar Rock Climbing Carabiner | NewDoar Thicken Climbing Harness | |
| Customer Reviews | 308
| 502
| 8
| 1
| 755
|
| Price | $10.99 | $19.99 | $29.99 | $29.99 | $37.99 |
| CE&EN | CE 1282 & EN 341 | CE 1282 & EN 341 | --- | CE 0194 & EN12275:2013 | CE 1282& EN353-1:2002 |
| Material | Aluminium and Magnesium alloy | 7075 Aircraft-grade Aluminum alloy | Aluminium and Magnesium alloy | Aluminium and Magnesium alloy | Polyester |
| Max Load | 35KN | 40KN | 24KN | 24kN | 22 KN |
| Rope | --- | --- | --- | --- | --- |
| Net Weight | 130g / 0.287lb | 370g / 0.816lb | 60g / 0.132lb | 80g/0.176lb | 943g / 2.079lb |
| Brand | NewDoar | NewDoar | NewDoar | NewDoar | NewDoar |