Feature

●Size - Snap-in valve stems for tubeless 0.453” (11.5mm) diameter rim holes, U.S. standard, providing safe tire system and safe driving, up to 100 PSI cold pressure per industry standard, durable and practical
●Premium quality - 100% leakage tested, high quality and providing safe tire system and safe driving.
●Easy to install - Deflate tire and breakdown tire off rim, insert new stem from inside rim until it snaps into place.
●Widely Applicable - Standard diameter of the snap-in valves makes them fit for most cars, heavy-duty trucks, larger trailers, wheelbarrows, lawn mowers, ATVs, and motorcycles.
●Valve Stem with a Cap - The cap of this rubber valve stem can give your wheel a stylish new look and help in keeping the tire inflated.


Description

TR600HP / TR-600HP High Pressure Brass Rubber Snap-In Tire Valve Stems 1-1/4"

4 Step to Install Valve Stem:
1.Deflate tire and breakdown tire off rim
2.Remove old valve stem
3.Insert new stem from inside rim until it snaps into place
4.Reinstall tire and inflate to recommended psi

First Way to Install Valve Stem:
1.Insert the valve stem through its hole in the wheel
2.Screw the valve stem tool onto the valve stem.
3.Use the handle to pull on the valve stem.

Second Way to Install Valve Stem:
1.Release the air in the tire with a valve change tool.
2.Turn the valve change tool and pull the valve out.
3.Press the valve stem into the tire with one quick motion