Braden Filtration replacement cartridge filter using 80/20 Cellulose Polyester blended media is a budget friendly option. It provides dependable filtration performance with a MERV 11 initial efficiency rating. The intended use for Cell/Poly Blend filters is for general dust, weld fumes, plasma/laser cutting smoke, and shot/sand blasting when the filtered air is being exhausted outside. This cartridge filter is constructed with galvanized metal pans and Inner + Outer cages. Potted in a high durometer urethane this filter is ready for use in your pulsed filtration system.

Dust Collector replacement filter for the following part numbers: AAF 1835669-001 AAF 1835669-004 Aercology 7036-11 Air Refiner ARM-19215-0 Air Refiner ARM-22269 Casco CA261-9814 Champion Labs LAF1852 Complete CF81-2269 Donaldson Torit 8PP-2600-427-226 Donaldson Torit 8PP-28888-00 Donaldson Torit 8PP-48107-00 Donaldson Torit 8PP-72477-01 Donaldson Torit P032951 Donaldson Torit P191244 Donaldson Torit P191551 Donaldson Torit P191866 ECO 15021 Endustra 51053 Environmental E02071 Environmental E04208 Environmental E04356 FARR 079203-000 FARR 211985-001 Filtermart 21-0007 Fleetguard AF4783 Fleetlife FA-12124 Fleetlife FA-22269 Flex-Kleen B80002 MPF 2233-0A MPF 2233-0B Nordson 101413 Pangborn P960357 Pneumafil 39321-1 Royal Filter RA-22269 TDC 10000003 TDC 10000016 TDC 10001407 Terex Johnson Ross P76219 TVS 61-2269 TVS 61-2269-109 Uniwash CP025.03E Wheelabrator 222600831 WIX 46862 Clark 1212294 Action Filtration CF000036 Aercology 7036-23 BHA 401-0101 Casco CA261-3094 Donaldson Torit P032954 EXIJET 1212565 TDC 10000008 TVS T4-26BB3151 Clark 1212565 Environmental E04188 Environmental E04189 Environmental E04445 Nordson 180770A AAF 1846955-001 TVS 61-5118-109 Wheelabrator 6613940 Environmental E04229 GEMA 105164 Nordson 147162B Nordson 180773A TDC 10000071 TDC 10000073 Action Filtration CF000189 TDC 10000053 Donaldson Torit 8PP-23099-00 Donaldson Torit P032953 Donaldson Torit P155248 Environmental E04532 TDC 10001411 Sly 306698 ECO 11299 Donaldson Torit P031474 JBI - Global 216-203

100% mechanical filtration technology. A pulse filter must maintain filtration performance mechanically. Which means the filter media and efficiency layers must perform before and after it is mechanically cleaned. Zero use of electro-static and the stable two-dimensional nano layer ensures optimized filtration efficiency. In reality the “as new” filter will be the lowest efficiency the filter will operate at during functional life.

Durable Media. Spun Bond polyester media is made with rigid continuous fibers that yield up to 3-4x the strength of traditional paper media. Engineered to withstand over 100,000 cleaning pulses ranging from 70 – 95 psi. The Polyester spun bond media is designed to perform resisting abrasion and wear throughout its lifetime caused by pulse cleaning.

Surface filtration technology. To maximize long term operating performance a filter must be designed with optimized surface filtration. The combination of a polyester substrate and nanofibers incorporates the high efficiency, two-dimensional surface that ensures the dust does not penetrate the nanofiber surface. This in turn provides maximum dust release during pulsing and lowest operating pressure drop over the life of the filter. It is critical the base media remains clean and free.

Dust Holding Capacity – is the capacity of a filter to capture and hold dust at an acceptable resistance for a period of time. The value is typically noted in grams, taken when the airflow resistance reaches a preset maximum. DHC must be compared to the same end of test level or comparison is essentially impossible.

Dust Holding Capacity (EN779-2102) > 6.0kgs. Most experts agree that comparisons of dust holding capacity is a significant baseline of data to consider when evaluating filter performance. A spun bond with nanofiber technology has been tested to hold more than 6.0kgs or 13lbs of dust up to 4.0” of operating pressure drop. This provides reassurance the filter will operate in challenging dust loading environments.

ASHRAE 52.2-2012 MERV (minimum Efficiency Reporting Value) – is an overall rating that provides expected “minimum levels of efficiency”. Averaging of

particle efficiency is also performed in three separate ranges. E1, E2 and E3. The E1 efficiency level averages the smallest particle size range (0.3μm – 3.0μm).

Pleat Support – For an air filter to perform at its maximum capacity, the pleated media must stay open and rigid through its entire pleat depth. Conventional pleated media will rely on corrugation or grooving. Under certain environmental (wet) or very high dust loadings or high temperatures, these corrugations can collapse or flatten, leading to pressure drop rise across the inlet. The filter must be designed with a permanent and fixed mechanical separation technique that won’t collapse but stay functional allowing pressure drop to remain stable.

Cleanly Making a Difference Since 1923!