Instruction Steps
Step 1: Spray carefully all mounting bolts and nuts to be removed with penetrating oil.
Step 2: Make sure the vehicle body properly before removing mounts. (Suggested: Use a 2" x 4" piece of wood 24" long or any other suitable size wood between the jack and body panel to distribute the load so as not to damage body panels.) If necessary, support the body in multiple areas.
Step 3: Loosen all nuts and bolts but do not remove them. Work from one side of the vehicle at a time. Remove the nuts and bolts from one mount location, and raise the body enough to replace the mount, NEVER HIGHTER. When raising the body, check for interference problems in other parts.
Step 4: One mount at a time with similar size urethane mounts. If washers/sleeves have been provided, use in combination of original.
Step 5: After replacing all mounts, tighten all nuts and bolts to the factory specifications.