Feature(may vary by option.)

●Oil Pressure Test and Diagnostic: JIFETOR engine oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc.
●Fitment Type: The oil pressure test tool includes 3 sizes (1/8 inch, 1/4 inch, 3/8 inch National (American) Pipe Thread) selectable brass adapters, can be connected to the corresponding sizes oil pressure test service port, on most gasoline or small diesel engine, includes car, motorcycle, ATV, truck and so on, which oil pressure not exceeds 100 pounds per square inch.
●Pressure Gauge and Hose: Pressure gauge adopts rubber cover protected 3 inch large dial. 0-100 pounds per square inch and 0-7 bar small scale range with big dial, very easy to read. No pressure holding function, return to zero automatically. The 30 inch long rubber nylon resin hose, is equipped with a 1/8 inch National (American) Pipe Thread brass adapter, can be connected to 1/4 inch and 3/8 inch adapters directly. Max working pressure: 300 pounds per square inch
●Easy to Operate: When you want to test the oil pressure by this engine oil pressure diagnostic gauge, disassemble the oil pressure sensor first, then screw on the oil pressure gauge, start the vehicle to operate it at a specified speed, the reading in the pressure gauge is the oil pressure of lubrication system. Please refer to equipment manufacturers operation instruction and compare to the manufacturers recommended readings
●Blow-Molded Case: This oil pressure tester gauge set includes 1 piece oil pressure gauge with hose and 2 pieces adapters. Easily accessed and organized in a sturdy wearproof plastic case for easy transportation, simple storage, and quick identification. Locking buckles for added security and molded handle for comfortable travel.

[Red Case]




[Blue Case]





Description

Oil Pressure Tester KitOil Pressure Tester Kit

JIFETOR 100PSI Fuel Pressure Tester Kit

  • 1x 3" Pressure Gauge with 30" Long Hose and 1/8" NPT Brass Adapter
  • 1x 1/4" NPT Brass Adapter with O-ring
  • 1x 3/8" NPT Brass Adapter with O-ring
  • 1x Instruction
  • 1x Customized Blow Molding Case 11-1/2"L x 7-3/4"W x 2"H

NECESSARY FUEL OIL INJECTION PRESSURE TESTER TOOLNECESSARY FUEL OIL INJECTION PRESSURE TESTER TOOL

NECESSARY FUEL OIL INJECTION PRESSURE TESTER TOOL

  • Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system. Proper fuel pressure is vital for engine operation and performance.
  • Too high fuel pressure can cause the engine to run too rich, incomplete combustion, excessive fuel consumption, increased carbon buildup, exhaust exceeding the standard.
  • And a low fuel pressure will lead to a lack of horsepower, stalling, and a slow or no-start condition.

fuel injector pressure tester gaugefuel injector pressure tester gauge

EASY TO OPERATE

1. Disassemble the oil pressure sensor first, then screw on the oil pressure gauge

2. Start the vehicle to operate it at a specified speed, the reading in the pressure gauge is the oil pressure of lubrication system

DIAGNOSTIC RESULT

Please refer to equipment manufacturers operation instruction and compare to the manufacturers recommended readings, to check if the reading is out of the normal range. And check if the dashboard light works well or not.

Below the minimum oil pressure: blocking oil strainer or oil filter, broken pressure-limiting valve spring , poorly working oil pump, low oil viscosity

Above the maximum oil pressure: high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open.

NOTE

  • 1. Please wear gloves and goggles when use.
  • 2. Test oil pressure by professionals or under the guidance of a professionals.
  • 3. You can use Teflon tape to wrap around thread connector to get better sealing.

compression tester engine oil pressure tester cylinder leak down tester fuel injection pump pressure tester fuel injection pump pressure tester engine oil pressure and transmission fluid pressure tester
JIFETOR Compression Tester Kit, JT018S1 JIFETOR Oil Pressure Tester Kit, JT019S1 JIFETOR Cylinder Leak Down Tester Kit, JT020S1 JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, JT021S1 JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, JT021S2 JIFETOR Engine Oil Pressure Gauge Transmission Fluid Tester Kit, JT022S1
Customer Reviews
4.5 out of 5 stars
660
4.5 out of 5 stars
156
4.2 out of 5 stars
532
4.3 out of 5 stars
311
4.3 out of 5 stars
515
4.3 out of 5 stars
227
Price $16.99 $15.99 $27.99 $20.99 $27.99 $20.99
Application Engine cylinder pressure tester Engine oil pressure tester Engine cylinder pressure & leak down tester Fuel injection pump pressure tester Fuel injection pump pressure tester Engine oil & transmission fluid pressure tester
Gauge Index Range 0-300psi 0-100psi 0-100psi, 0-100% 0-100psi 0-140psi 0-500psi

Whats in the box

  • Oil Pressure Gauge Tool
  • 2 Pieces Brass Adapter
  • Blow Molding Case