Bluebolt remote power and energy management provides real-time, cloud-based control and monitoring of the energy used by electronic devices. From easy reboots of locked-up electronics to comprehensive energy tracking and scheduled conservation, bluebolt provides a unique combination of control and monitoring directly at the electronics Power source.;; The 15a outlet M4315-PRO power management with control & energy monitoring from Panamax has one front panel outlet & eight independent outlets that are controllable/programmable via the web with the RS-232 card (included but not installed) or the included cv-1 bluebolt card in back.;; linear filtration is provided with three isolated lift filter banks plus one isolated filter bank for high current devices. Automatic voltage monitoring (AVM), protect or disconnect circuitry and sequential startup/shutdown provide superior protection to whatever is connected to the device. Two buttons on the front panel are for programmable rebooting. Provides LAN, Telco, cable/satellite/antenna TV signal side protection. The M4315-PRO voltage sense trigger input uses a standard 3.5mm mini-mono plug. This feature provides an on/off trigger for the M4315-PRO using a direct current (DC) voltage signal. Many components such as pre-amplifiers and receivers have a DC trigger built in, and will transmit a constant power Signal when turned on and in use. The presence of this power Signal will turn on the M4315-PRO switched outlets. When the source component is turned off, the voltage trigger signal is also turned off, and the M4315-PRO shutdown sequence is initiated. An AC adapter of the appropriate voltage (5-24 V DC) plugged into a switched outlet may also be used if a DC trigger is not built in.;; The sleek design Includes volt/AMP meter, outlet status and warning LEDs. Includes removable rack ears. Dim: 1.75"H x 17"W x 12.25"D. 3-Year limited **and $5 million lifetime limited connected equipment policy.