Feature(may vary by option.)
●UNIQUE DESIGN: PREMIUM TIP, ANTI-VIBRATION DESIGN, LARGE TEETH. General purpose finishing and the 80 teeth tip is made of VC1 tungsten carbide which adds the saw blades sharpness and provide extended life of saw blade. The large tooth design allows the blade to be safely sharpened more times. Larger spacing between the teeth is more convenient for chip removal and heat dissipation.
●HIGH QUALITY CARBIDE MATERIAL: Provide the best cutting experience, with good cutting performance. Prolong the service life of Saw Blade, and add the sharpness.
●WIDELY USE: The 10" saw blade has a 5/8" diamond arbor which fits into both round and diamond hole blade machine and maintains the stability when in use.
●EXCELLENT ATB STYLE: The ATB style which adds the cutting speed and durability. This helps maximize both the accuracy of the cut and the efficiency of your work, so you can enjoy a job well done and the ability to complete more tasks in less time.
●USER GUIDE: The equipment should be equipped with the safety protection device. When not in use, hang the saw blade away from the damp place to prevent rust.
[12 X100T]
[7-1 & 4 X40T]
[10 X80T]
[7-1 & 4 24T (3 Pack)]
[7-1 & 4 u2019 u201924T | 40T | 60T(3Pcs)]
Description
The Golden Rule Of Blade Selection
For every design choice, there are pros and cons, and more teeth is not always better. More teeth also means more friction and heat, more resistance to the saw, slower feed rates, and a higher chance of burning on some materials. Inversely, fewer teeth tend to mean faster more efficient cutting, but usually also means a rougher cut.
COMOWARE ATB Finishing & Trimming Circular Saw Blade
10” - 80 Tooth 5/8“ Arbor
Alternate Top Bevels are ideal for severing wood grains in cross cut
- The versatility of the ATB grind makes it a very common grind on many types of blades, especially woodworking blades.
- The bevel helps reduce tear-out on cross-grain and plywood cuts, is reasonably durable, and can still be fairly efficient at ripping with the grain.
- Essentially the steeper the bevel angle, the less tear out the teeth will cause but also becoming increasingly less efficient at ripping as the bevel increases.
|
|
|
|
|---|---|---|
|
A gullet is the space between the teeth on a saw blade. One of the reasons a saw blade with fewer teeth will cut faster is that there is more gullet space in front of each tooth, which allows for better chip removal. |
Laser-cut expansion slots help channel heat build-up during the cutting process, allowing the blade to expand and contract without distorting and destroying the tension of the blade’s body. |
A positive hook angle (forward) will have more pull on the material than a low or negative hook blade, which is a feature best suited for ripping operations on a table saw. |
|
|
|
|
|
|---|---|---|---|---|
| Circular saw blade | Cut off wheel | Oscillating tool blades | Reciprocating saw blades | |
| Material | Carbide | Corundum, Alumina Oxide, Hard Bond | High Carbon Steel | High Carbon Steel (65Mn) |
| Size | 7 1/4" | 4 1/2" | 1-3/4 | 9" |