Feature(may vary by option.)
●DIMENSIONS - Includes 1pc 10*5/8*80T TCT circular saw blade.
●APPLICATION - Ideal for cross-cutting softwood, hardwood, plywood, chipboard, multi-board, panels, MDF,plated&counted-plated panels, laminated&Bi-laminate plastic, and FRP. Providing a high degree of finish edge. The blades also can rip cut along the grain.
●MATERIAL - Fully hardened steel blade body – delivers accuracy and resists bending and deflection for true cuts.
●FEATURES - Incorporates an ATB (Alternating Top Bevel) offset tooth design, The angle of the tooth scores the surface of the wood in advance of the cut, cleanly cutting the wood fibers before the following teeth remove the chip. This provides for a much smoother cut, with much less chance of splintering the surface of the wood.
●Tungsten carbide teeth provide excellent wear and heat resistance. The positive cutting angle which provides fast and efficient removal of chips and swarf.
[7-1 & 4 Inch 40T]
[5-1 & 2 Inch 18T]
[12 Inch 100T]
[7-1 & 4 Inch 60T]
[5-1 & 2 Inch 24T]
[5-1 & 2 Inch 36T]
[6-1 & 2 Inch 18T&24T]
[8-1 & 4 Inch 24T&40T&60T]
[10 Inch 32T&60T]
[7-1 & 4 Inch 24T]
[12 Inch 32T&80T]
[12 Inch 80T]
[10 Inch 60T]
[4-1 & 2 Inch 24T&40T]
[7-1 & 4 Inch 24T(10-PACK)]
[10 Inch 80T]
[7 Inch 36T]
[7-1 & 4 Inch 24T&40T&60T]
[10 Inch 52T]
[7-1 & 4 Inch 24T&60T]
Description
|
|
|
|
|---|---|---|
ATBIncorporates an ATB (Alternating Top Bevel) offset tooth design, The angle of the tooth scores the surface of the wood in advance of the cut, cleanly cutting the wood fibers before the following teeth remove the chip. This provides for a much smoother cut, with much less chance of splintering the surface of the wood. |
ApplicationIdeal for: high quality crosscuts and rip cuts in wood, plywood & melamine. Solve all kinds of tape nail wood. Suggested projects: trim, remodeling/demolition. |
Fast Nail CuttingSolve all kinds of tape nail wood. Adopt sandwich welding technology with ceramie tip, when cutting through nails or knur at high speed rotation, the carbide tips dont drop out or chip |
Protective sleeve
Impact resistant plastic protective sleeve
Each saw blade is equipped with a protective sleeve, which shall be removed during use and put on again after use. As the alloy saw blade is sharp and sensitive, please wear a protective sleeve to avoid damage caused by bumps and bruises when not in use
