●UES Sensor Cleaner is alcohol-free and ammonia-free. Ideal for cleaning both CCD and CMOS sensors. ●Ultra pure water-based sensor cleaner has non-aggressive formula. ●Super soft swab head is fully covered by ultra fine microfiber - efficient cleaning and no scratch ●Flexible swab rod with a mini channel enables the pressure on the swab head evenly across the sensor ●Every sensor cleaning swab is made in a Class 100 Clean-Room and sealed in a vacuum package
Description
Features
Safe
alcohol-free cleaner safe to all sensors
efficient and effective cleaning result
streak-free
EU REACH Certified
Easy to Use
lint free super fine microfiber
super soft swab head
Compatible with most of APS-C cameras
Clean
made in a dust-free workshop
individually vacuum packed
SENSOR CLEANING INSTRUCTION:
Before start, shoot a piece of white paper with Aperture Priority (A) mode set at f/22 or higher. You could use the pop-up flash. Locate the dust or spot on your sensor.
Make sure your camera’s battery is 100% fully charged. Set camera to sensor cleaning mode, so the delicate shutter and mirror mechanisms stay out of the way, and give you access to the sensor.
Use an air blower to remove loose dust from the sensor
Open one end of the swab package and remove the swab
Dispense 1 to 2 drop of cleaner to the edge of the swab
Hold the handle at a 60◦ angle, off the surface of the sensor
Swipe the swab from one end of the sensor to the other end with single constant motion
Turn the swab 180◦ and use the clean side of the swab to swipe the sensor in the same direction again with single constant motion
Discard the used swab and never reuse the same swab on any other sensors. Always use a sealed swab for other applications.
Brief content visible, double tap to read full content.
Full content visible, double tap to read brief content.