Feature(may vary by option.)

●This adapter can be installed on the light stand, and a photography umbrella can be installed to adjust the angle, and the photography effect can be achieved by adjusting the appropriate angle. This is a necessary gadget that can be used for portraits, indoor and product photography.
●Suitable for most light brackets. It can be assemble.It can be assembled in seconds. The adapter is a locking adapter that quickly switches between devices. Suitable for flat head light stand, etc.d in seconds.
●It can be installed with a variety of photography umbrellas, with a 180 ° rotating joint, which can vertically adjust the photography umbrella, flash and LED lights. The top metal spigot can be adjusted 360 ° horizontally
●With removable metal 1/4 inch to 3/8 inch screws, the diameter of the bracket mouth is 16MM, suitable for most lamp holders.
●It can be connected to portable LED lights, panel lights, ring lights, monitors, triggers, microphones and any with 1/4 inch Or 3/8 inch internal thread attachment.

[Two]





Description

holderholder

WELLMAKINGWELLMAKING
WELLMAKING - professional photo & video equipment manufacture

Our products are widely used in Photography, Video, micro movie, News Interview, Stage performance, TV Production, Portrait Photography, Wedding photography, Mobile shooting etc.And many photography fanatics are using our products all over the world.

Camera Bracket Light Stand with Umbrella Hole adapter

Fit for studio,Photographers and video shooters

This bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different angle.

Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20 or 3/8"-16 male thread.

  • Hold the umbrella and also support the light,make it adjustable to achieve different effects.
  • The 1/4"-3/8" double-end nut make it possible to install your light on the light stand or tripod freely
  • Metal and nylon Alloy material make it more durable and longer use time.
  • Single Kit Size：7.2*5.9*1.8inch
  • Single Weight:0.4lb

usage

The special design with detachable screw spigot, means you could put the spigot into both ends of the tilt adapter to get the 2 different usage.

1. Put this spigot into top end of the tilt adapter and attach your flash light or LED light, then you could adjust the angle of umbrella and your light in same time.

2. Put this spigot into bottom end of the tilt adapter and attach your flash light or LED light,, then you could adjust the angle of your light into the middle place of the umbrella for better concentrate the light beam.